Moriah Log: Difference between revisions
Jump to navigation
Jump to search
Moriah Baltz (talk | contribs) |
Moriah Baltz (talk | contribs) |
||
| Line 7: | Line 7: | ||
*Converted .stl files to .gcode files (through slic3r) to prepare them to print on the LULZBOT 3-D printer. | *Converted .stl files to .gcode files (through slic3r) to prepare them to print on the LULZBOT 3-D printer. | ||
*(testing at Infill> Fill Density> .05) | *(testing at slic3r settings> Infill> Fill Density> .05) | ||
*3-D printed the Minimug. | *3-D printed the Minimug. | ||
Revision as of 14:35, 11 June 2014
Tues Jun 10, 2014
- Worked on the instruction manual to the Solenoid Module Assembly.
- Installed a plug-in on sketchup to export files as .stl files.
- Converted .stl files to .gcode files (through slic3r) to prepare them to print on the LULZBOT 3-D printer.
- (testing at slic3r settings> Infill> Fill Density> .05)
- 3-D printed the Minimug.
- Viewed .stl files to check measurements in meshlab.
Mon Jun 9, 2014
- First day at FeF.
- Introduction to the CEB Press.
- Worked on the instruction manual for the Solenoid Module Assembly.
- Leveled a 3D-Printer (LULZBOT)
- Ran Bed Level Check tests
- Successfully printed my first 3D print. A PLA tubing with holes.
Mon Jun 9, 2014
- First day at FeF.
- Introduction to the CEB Press.
- Worked on the instruction manual for the Solenoid Assembly Module.
- Leveled a 3D-Printer (LULZBOT)
- Ran Bed Level Check tests
- Successfully printed my first 3D print. A PLA tubing with holes.