Moriah Log: Difference between revisions
Jump to navigation
Jump to search
Moriah Baltz (talk | contribs) No edit summary |
Moriah Baltz (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
=Thurs Jun 12, 2014= | |||
*Worked on the instruction manual to the [https://docs.google.com/presentation/d/1SUUtXan2g-ZltK5WlgeAXnqHiHaWgqLzG8JlQRqrjkc/edit#slide=id.p: Solenoid Module Assembly]. | |||
*Tested 3-d printing a quarter scale model of the male bushing clampshell on the TAZ LULZBOT printer at an infill density of 0.8 and height 0.35. | |||
*Helped assemble the metal frame of the pool. | |||
=Wed Jun 11, 2014= | =Wed Jun 11, 2014= | ||
Revision as of 14:32, 13 June 2014
Thurs Jun 12, 2014
- Worked on the instruction manual to the Solenoid Module Assembly.
- Tested 3-d printing a quarter scale model of the male bushing clampshell on the TAZ LULZBOT printer at an infill density of 0.8 and height 0.35.
- Helped assemble the metal frame of the pool.
Wed Jun 11, 2014
- Worked on the instruction manual to the Solenoid Module Assembly.
- Rotated the drawing of the male bushing clampshell .stl file in FreeCad.
- Tested 3-d printing a quarter scale model of the male bushing clampshell on the TAZ LULZBOT printer at an infill density of 0.3.
- Helped assemble the metal frame of the pool.
Tues Jun 10, 2014
- Worked on the instruction manual to the Solenoid Module Assembly.
- Installed a plug-in on sketchup to export files as .stl files.
- Converted .stl files to .gcode files (through slic3r) to prepare them to print on the LULZBOT 3-D printer.
- (testing at slic3r settings> Infill> Fill Density> .05)
- 3-D printed the Minimug.
- Viewed .stl files to check measurements in meshlab.
- Presentation on 3D Printing - [1]
Mon Jun 9, 2014
- First day at FeF.
- Introduction to the CEB Press.
- Worked on the instruction manual for the Solenoid Assembly Module.
- Leveled a 3D-Printer (LULZBOT)
- Ran Bed Level Check tests
- Successfully printed my first 3D print. A PLA tubing with holes.