Moriah Log: Difference between revisions
Jump to navigation
Jump to search
Moriah Baltz (talk | contribs) No edit summary |
Moriah Baltz (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
=Fri Jun 13, 2014= | |||
*Worked on the instruction manual to the [https://docs.google.com/presentation/d/1SUUtXan2g-ZltK5WlgeAXnqHiHaWgqLzG8JlQRqrjkc/edit#slide=id.p: Solenoid Module Assembly]. | |||
*Tested 3-d printing a full scale (2540%) model of the male bushing clampshell on the TAZ LULZBOT printer with ABS at an infill density of 0.8, Nozzle size .5 mm, and height 0.5 mm. Also manually raised the z-stop slightly. Successful print! | |||
*Presentation on 3D Printing - [https://docs.google.com/a/opensourceecology.org/presentation/d/1csmBrlVIua4N-r2lH0gmbRBTo3uhPyPOd_EgnBuMY4A/edit#slide=id.g34eeff40f_020] | |||
=Thurs Jun 12, 2014= | =Thurs Jun 12, 2014= | ||
Revision as of 15:20, 17 June 2014
Fri Jun 13, 2014
- Worked on the instruction manual to the Solenoid Module Assembly.
- Tested 3-d printing a full scale (2540%) model of the male bushing clampshell on the TAZ LULZBOT printer with ABS at an infill density of 0.8, Nozzle size .5 mm, and height 0.5 mm. Also manually raised the z-stop slightly. Successful print!
- Presentation on 3D Printing - [1]
Thurs Jun 12, 2014
- Worked on the instruction manual to the Solenoid Module Assembly.
- Tested 3-d printing a quarter scale model of the male bushing clampshell on the TAZ LULZBOT printer with ABS at an infill density of 0.8 and height 0.35.
- Presentation on 3D Printing - [2]
- Helped assemble the metal frame of the pool.
Wed Jun 11, 2014
- Worked on the instruction manual to the Solenoid Module Assembly.
- Rotated the drawing of the male bushing clampshell .stl file in FreeCad.
- Tested 3-d printing a quarter scale model of the male bushing clampshell on the TAZ LULZBOT printer with ABS at an infill density of 0.3.
- Helped assemble the metal frame of the pool.
Tues Jun 10, 2014
- Worked on the instruction manual to the Solenoid Module Assembly.
- Installed a plug-in on sketchup to export files as .stl files.
- Converted .stl files to .gcode files (through slic3r) to prepare them to print on the LULZBOT 3-D printer.
- (testing at slic3r settings> Infill> Fill Density> .05)
- 3-D printed the Minimug with PLA.
- Viewed .stl files to check measurements in meshlab.
- Presentation on 3D Printing - [3]
Mon Jun 9, 2014
- First day at FeF.
- Introduction to the CEB Press.
- Worked on the instruction manual for the Solenoid Assembly Module.
- Leveled a 3D-Printer (LULZBOT)
- Ran Bed Level Check tests
- Successfully printed my first 3D print. A PLA tubing with holes.