Power Cube Workshop: Difference between revisions
Jump to navigation
Jump to search
Tom Griffing (talk | contribs) |
Tom Griffing (talk | contribs) |
||
| Line 31: | Line 31: | ||
== Tool Safety == | == Tool Safety == | ||
* Abrasive Saw | * Abrasive Saw | ||
** Sparks | ** Sparks will fly | ||
** Blade | ** Blade is abrasive (careful not to touch) | ||
** | ** Steel will be hot and may have sharp edges after cutting | ||
*Angle Grinder | * Angle Grinder | ||
** Sparks | ** Sparks will fly - don't point them at anyone | ||
** Blade | ** Blade cuts instantly | ||
** Hot steel | ** Hot steel after grinding | ||
** Torque | ** Torque when starting/stopping - Use caution while spinning | ||
* Oxy Acetylene Torch | * Oxy Acetylene Torch | ||
** Tank / hose placement | |||
** Open valves, strike flame | |||
** Flame control | ** Flame control | ||
** | ** Dripping molten metal / splatters | ||
** | ** Starting cut | ||
** | ** Popping | ||
** Shutoff / gas off / wind hose | |||
* MIG Welder | * MIG Welder | ||
** | ** Position Welder / Work | ||
** | ** Gas on | ||
** Power On | |||
** Eye protection: Helmet | |||
** Insulated Gloves | |||
** Ground clamp | |||
** Hot Arc | ** Hot Arc | ||
** Hot steel | ** Hot steel | ||
** Shutoff power & gas | |||
* Drill | * Drill | ||
** Clamping | ** Clamping | ||
Revision as of 21:57, 19 June 2014
Safety Briefing
General Safety Notes
- One accident ruins the party for everyone
- Powerful tools can easily cut and burn soft tissue
- Protect yourself from harm, point out unsafe practices to others or to OSE personnel
Shop Safety
- First Aid Kit
- Emergency Contact
- Electric panel
- Know location of cutoff for shop
- Fire Extinguishers
- Know where they are
Personal Safety Equipment
Available Equipment:
- Helmets
- Eye Protection
- Hearing Protection
- Gloves
Recommended:
- Shirt - Long sleeve, preferably cotton/non-flammable
- Pants - Long legs, preferably cotton/non-flammable
Tool Safety
- Abrasive Saw
- Sparks will fly
- Blade is abrasive (careful not to touch)
- Steel will be hot and may have sharp edges after cutting
- Angle Grinder
- Sparks will fly - don't point them at anyone
- Blade cuts instantly
- Hot steel after grinding
- Torque when starting/stopping - Use caution while spinning
- Oxy Acetylene Torch
- Tank / hose placement
- Open valves, strike flame
- Flame control
- Dripping molten metal / splatters
- Starting cut
- Popping
- Shutoff / gas off / wind hose
- MIG Welder
- Position Welder / Work
- Gas on
- Power On
- Eye protection: Helmet
- Insulated Gloves
- Ground clamp
- Hot Arc
- Hot steel
- Shutoff power & gas
- Drill
- Clamping
- Drilling
Power Cube Developer's Presentation