LifeTrac II Part Sourcing: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 11: | Line 11: | ||
* 2 × 100"×6"×2" front loader arm tubes | * 2 × 100"×6"×2" front loader arm tubes | ||
* 2 × 84"×6"×2" rear loader arm tubes | * 2 × 84"×6"×2" rear loader arm tubes | ||
* | * 4 × 8"×8"×1/4" plate to mount h/cylinders to base | ||
* 12 × 8"dom to mount loader shafts to loader arms. | |||
* 4 × 32"diameter×9" wheels | * 4 × 32"diameter×9" wheels | ||
* 1/2"plate & 1-15/16"tubing to make wheel mounts | * 1/2"plate & 1-15/16"tubing to make wheel mounts | ||
Surplus Centre | Surplus Centre | ||
* 8 × flange Bearings | * 8 × flange Bearings | ||
* 2 × Front Loader cylinders - 36" - $174 - 48 5/8" retracted length - [https://www.surpluscenter.com/item.asp?item=9-6775&catname=hydraulic] | |||
* 2 × Rear loader cylinders | |||
*Loader cylinders - 36" - $174 - 48 5/8" retracted length - [https://www.surpluscenter.com/item.asp?item=9-6775&catname=hydraulic] | * 4 × Motors | ||
[[Category:LifeTrac II]] | [[Category:LifeTrac II]] | ||
Revision as of 01:19, 14 June 2010
Swaiger
- 4 × 8'×4"×4" tubes for base.
- 3 × 5'×4"×4" under base tubes.
- 12 × 10"×8"×0.5" steel plates to mount flange bearings and hydraulic motors to.
- 4 × 32"×1-7/8" axle shafts
- 2 × 56"×4"×4" vertical chassie centre tubes
- 4 × 59"×4"×4" vertical chassie 4 corner tubes
- 2 × 88"×4"×4" top chassie tubes
- 3 × 44"×4"×4" top chassie tubes
- 4 × 32"1-7/8" loader shafts
- 2 × 100"×6"×2" front loader arm tubes
- 2 × 84"×6"×2" rear loader arm tubes
- 4 × 8"×8"×1/4" plate to mount h/cylinders to base
- 12 × 8"dom to mount loader shafts to loader arms.
- 4 × 32"diameter×9" wheels
- 1/2"plate & 1-15/16"tubing to make wheel mounts
Surplus Centre
- 8 × flange Bearings
- 2 × Front Loader cylinders - 36" - $174 - 48 5/8" retracted length - [1]
- 2 × Rear loader cylinders
- 4 × Motors