LifeTrac II Part Sourcing: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 40: | Line 40: | ||
* 2 × Rear loader cylinders - [https://www.surpluscenter.com/item.asp?item=9-7711-24&catname=hydraulic] | * 2 × Rear loader cylinders - [https://www.surpluscenter.com/item.asp?item=9-7711-24&catname=hydraulic] | ||
* 4 × Motors - [https://www.surpluscenter.com/item.asp?item=9-7469&catname=] | * 4 × Motors - [https://www.surpluscenter.com/item.asp?item=9-7469&catname=] | ||
* | * 2 × 1-1/4" shaft couplers - [https://www.surpluscenter.com/item.asp?item=1-1563-G&catname=] | ||
* 1-3/8" 6T fully splined shafting - [https://www.surpluscenter.com/item.asp?item=1-2938-6&catname=] | * 1-3/8" 6T fully splined shafting - [https://www.surpluscenter.com/item.asp?item=1-2938-6&catname=] | ||
*16 × 1.875" double split shaft collars - [https://www.surpluscenter.com/item.asp?item=1-2768-187&catname=powerTrans] | *16 × 1.875" double split shaft collars - [https://www.surpluscenter.com/item.asp?item=1-2768-187&catname=powerTrans] | ||
Revision as of 23:46, 17 June 2010
Cut List
Square tube:
- 4 × 7'8"×4"×4" tubes for base
- 3 × 5'×4"×4" under base tubes
- 2 × 52"×4"×4" vertical chassis centre tubes
- 2 × 55"×4"×4" vertical chassis tubes for front corners
- 2 × 59"×4"×4" vertical chassis tubes for rear corners (PC mounting area)
- 2 × 84"×4"×4" top chassis tubes
- 3 × 44"×4"×4" top chassis tubes
Rounds:
- 4 × 28"×1-7/8" axle shafts
- 4 × 54"1-7/8" loader shafts
- 2 × 100"×6"×2" front loader arm tubes
- 2 × 84"×6"×2" rear loader arm tubes
- 12 × 8" dom to mount loader shafts to loader arms.
- 1-7/8"bore bushing tubing to mount loader arm shafts to frame
- 1"bore tubing for 8 bushings to connect h/cylinders to loaders
- plate to mount bushings to loader arms
Plate:
- 12 × 10"×8"×0.5" steel plates to mount flange bearings and hydraulic motors to
- 4 × 10"×8"×1/2" or 3/8" plate to mount h/cylinders to base
- 4 × 32"diameter×9" wheels
- 1/2"plate & 1-15/16"tubing to make wheel mounts
Bolts
- 24 × 3/4" bolts to span 4-1/4" space + nuts & washers to suit (for wheel plates)
- 42 × 3/4" bolts to span 8" space + nuts & washers to suit (for frame)
- 8 or 16 bolts for hydraulic plates to span 4-1/2" space + nuts & washers to suit
Surplus Center
- 8 × flange Bearings - [1]
- 2 × Front Loader cylinders - 36" - $174 - 48 5/8" retracted length - [2]
- 4.9 square inch area at 2500 PSI implies 12000 lb of force for each cylinder
- 2 × Rear loader cylinders - [3]
- 4 × Motors - [4]
- 2 × 1-1/4" shaft couplers - [5]
- 1-3/8" 6T fully splined shafting - [6]
- 16 × 1.875" double split shaft collars - [7]