FFF Extruder: Difference between revisions
Jump to navigation
Jump to search
(Created page with "== Overview == The extruder forces the filament into the hot end. It usually grips the filament by pinching it between a roller bearing and a knurled, hobbed, or toothed pinch...") |
(No difference)
|
Revision as of 12:13, 7 January 2016
Overview
The extruder forces the filament into the hot end. It usually grips the filament by pinching it between a roller bearing and a knurled, hobbed, or toothed pinch wheel. Torque is usually supplied by a Stepper Motor.