Christian Rupp Log: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
=Thu Jun 29, 2017= | |||
Got a step-by step plan about what should be done, learned about the G-Code and found those of interest for me from Marlin. | |||
(M115 gives me unique Data about the printer, M20 to M30 are used to read, write to the sd card and start the printing process from there) | |||
Found out how to reformat fcstd to stl with command line only (for automatic conversion on upload). | |||
(1,5h) | |||
=Tue Jun 27, 2017= | =Tue Jun 27, 2017= | ||
Revision as of 22:53, 29 June 2017
Thu Jun 29, 2017
Got a step-by step plan about what should be done, learned about the G-Code and found those of interest for me from Marlin. (M115 gives me unique Data about the printer, M20 to M30 are used to read, write to the sd card and start the printing process from there) Found out how to reformat fcstd to stl with command line only (for automatic conversion on upload). (1,5h)
Tue Jun 27, 2017
Researched Methods for cluster management, communication between printer and computer etc. Most Promising: Octoprint
This can be run for several printers
Hardware is defined and set, list and setup in the presentation. Very rough price estimate: 45 $ + 20$/printer(5h)
Sun Jun 25, 2017
Finished FreeCAD test, Video is uploaded to youtube. https://www.youtube.com/watch?v=nkDFKByIPfE (about 7h)