File:LFS BEARINGS.fcstd: Difference between revisions
Jump to navigation
Jump to search
(Created using a cut so there are no sketches to remove. Should not need any editing since all bearings are meant to go on M4 (4mm) bolts throughout the device.) |
(No difference)
|
Revision as of 18:07, 29 July 2017
Created using a cut so there are no sketches to remove. Should not need any editing since all bearings are meant to go on M4 (4mm) bolts throughout the device.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 21:23, 29 July 2017 | (4 KB) | Robinmaster18 (talk | contribs) | Corrected Dimensions (radius = diameter/2). Editable. |
| 18:07, 29 July 2017 | (4 KB) | DixonNahrwold (talk | contribs) | Created using a cut so there are no sketches to remove. Should not need any editing since all bearings are meant to go on M4 (4mm) bolts throughout the device. |
You cannot overwrite this file.
File usage
The following page uses this file: