D3D v18.04 Software: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
#Start and end g-codes in Cura | #Start and end g-codes in Cura | ||
#Machine Settings in Cura | #Machine Settings in Cura | ||
#Print parameters in | #Print parameters in Curafater | ||
#Machine Settings in Cura | #Machine Settings in Cura | ||
=Software= | |||
==Marlin== | |||
*D3D v18.04 Marlin is updated for a geared extruder - see - [[File:OSE_Marlin.zip#Titan_Aero_Extruder_Version]] | *D3D v18.04 Marlin is updated for a geared extruder - see - [[File:OSE_Marlin.zip#Titan_Aero_Extruder_Version]] | ||
*[[D3D Lulzbot Cura]] from [[D3D Controller]] | *[[D3D Lulzbot Cura]] from [[D3D Controller]] | ||
Revision as of 21:40, 24 May 2018
Background
There are 6 places where software may be configured when developing new versions of the OSE 3D Printer:
- Marlin
- Configuration file (.ini) in Cura.
- Start and end g-codes in Cura
- Machine Settings in Cura
- Print parameters in Curafater
- Machine Settings in Cura
Software
Marlin
- D3D v18.04 Marlin is updated for a geared extruder - see - File:OSE Marlin.zip
- D3D Lulzbot Cura from D3D Controller