Buildlog.net 2.x Laser: Difference between revisions
Jump to navigation
Jump to search
(Created page with "The second generation open source laser cutter/engraver design from buildlog.net is complete. The new machine is called the Buildlog.net 2.x Laser. The name comes from the fac...") |
(No difference)
|
Revision as of 23:13, 2 March 2011
The second generation open source laser cutter/engraver design from buildlog.net is complete. The new machine is called the Buildlog.net 2.x Laser. The name comes from the fact that this is the second generation machine and it is basically a 2 axis design. The third, vertical axis, is manually controlled with an optional upgrade to digital control. The 2.x Laser takes all the optimizations learned from the first laser and all the other lasers documented on buildlog.net forum.
more on this:http://www.buildlog.net/blog/2011/02/buildlog-net-2-x-laser/