File:EndPlug.FCStd: Difference between revisions
Jump to navigation
Jump to search
ChrisCaswell (talk | contribs) (End plug fitting into 4x4 tubing, with bracket to hold 1in Idler) |
(No difference)
|
Revision as of 00:20, 17 November 2019
End plug fitting into 4x4 tubing, with bracket to hold 1in Idler
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 01:52, 18 November 2019 | (104 KB) | ChrisCaswell (talk | contribs) | |
| 01:17, 18 November 2019 | (104 KB) | ChrisCaswell (talk | contribs) | Updated tolerances for .8mm nozzle, 0.4mm layer height | |
| 21:16, 17 November 2019 | (113 KB) | ChrisCaswell (talk | contribs) | ||
| 05:17, 17 November 2019 | (113 KB) | ChrisCaswell (talk | contribs) | ||
| 01:34, 17 November 2019 | (139 KB) | ChrisCaswell (talk | contribs) | ||
| 00:20, 17 November 2019 | (134 KB) | ChrisCaswell (talk | contribs) | End plug fitting into 4x4 tubing, with bracket to hold 1in Idler |
You cannot overwrite this file.
File usage
The following page uses this file: