D3D Mega v23.05 Conceptual Design: Difference between revisions
Jump to navigation
Jump to search
(Created page with "File:D3D Mega v23.05.png Based on earlier versions of the Mega that use the 8mm Universal Axis, but uses 8 total Universal Axes on the Z axis. This should allow for incre...") |
(No difference)
|
Revision as of 03:51, 22 May 2023
Based on earlier versions of the Mega that use the 8mm Universal Axis, but uses 8 total Universal Axes on the Z axis. This should allow for increased bed lift without belt skipping.