D3D Mega v23.05 Production Engineering: Difference between revisions
Jump to navigation
Jump to search
(Create page and begin tooling section) |
(No difference)
|
Revision as of 09:40, 14 July 2023
Tooling
This version is being designed specifically to be built with as few shop tools as possible to enable wider replication. Metal materials can be bought cut to size. High temperature epoxy can substitute for welds.
Tools Needed: Rubber mallet for frame assembly (optional) Allen Wrench Set (5mm hex, 2.5mm hex, 2mm hex) Screwdrivers (3mm flathead, Phillips #1, Phillips #2)