Industrial Robot Bill of Materials: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
m (Edited for joint 1-6 gearboxes clarification)
 
(26 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{ToolTemplate|ToolName=Industrial Robot}}
#REDIRECT [[Industrial Robot/Bill of Materials]]
 
----
 
The following is a general bill of materials for the industrial robot with *minimum frame mechanical design*, *hydraulic drive through solenoid valve and stepper motor controlled needle valve*, and *basic electrical configuration*. Note: this bill of materials is not fully developed and may not reflect the optimal design of the industrial robot. As such, this BOM is still a work in progress.
 
{| cellpadding="6" cellspacing="0" border="1" align="left"
! PART NAME
! NUMBER NEEDED
! PURPOSE
! COST
! SUGGESTED SOURCE
 
|-align="left"
! Joint 1 Hydraulic Motor
! 1
! Rotates base of industrial robot
!est. 100-300
! surpluscenter
 
|-align="left"
! Joint 2 Hydraulic Motor
! 1
! Tilts main arm of industrial robot from base
! est. 100-300
! surpluscenter
 
|-align="left"
! Joint 3 Hydraulic Motor
! 1
! Tilts forearm of industrial robot from main arm
! est. 100-300
! surpluscenter
 
|-align="left"
! Joint 4 Hydraulic Motor
! 1
! Rotates wrist of industrial robot from forearm
! est. 100-300
! surpluscenter
 
|-align="left"
! Joint 5 Hydraulic Motor
! 1
! Tilts wrist of industrial robot
! est. 100-300
! surpluscenter
 
|-align="left"
! Joint 6 Hydraulic Motor
! 1
! Rotates end-effector of industrial robot
! est. 100-300
! surpluscenter
 
|-align="left"
! Foundation Underplate
! 1
! Ground contact mount for industrial robot (x by y by z steel plate)
!
!
 
|-align="left"
! Foundation Underplate Bolt
! 4
! Fastener piece for foundation underplate to ground
!
!
 
|-align="left"
! Foundation Underplate Washer
! 4
! Fastener piece for foundation underplate to ground
!
!
 
|-align="left"
! Foundation Underplate Nut
! 4
! Fastener piece for foundation underplate to ground
!
!
 
|-align="left"
! Foundation Underplate Welding Consumables
!
! Materials for welding the foundation pillars onto the foundation underplate
!
!
 
|-align="left"
! Foundation Pillar (x by y by z steel square tube/rod, t thickness)
! 4
! Supporting frame between foundation plates(x by y by z steel square tube/rod, t thickness)
!
!
 
|-align="left"
! Foundation Pillar L-piece
! 4
! Connector piece between foundation pillars and foundation overplate (x by y by z steel L-piece, t thickness)
!
!
 
|-align="left"
! Foundation Pillar Bolt
! 16
! Fastener piece between foundation pillars and foundation overplate
!
!
 
|-align="left"
! Foundation Pillar Washer
! 16
! Fastener piece between foundation pillars and foundation overplate
!
!
 
|-align="left"
! Foundation Pillar Nut
! 16
! Fastener piece between foundation pillars and foundation overplate
!
!
 
|-align="left"
! Foundation Overplate
! 1
! Mid-air mount for industrial robot (x by y by z steel plate, t thickness)
!
!
 
|-align="left"
! Baseplate
! 1
! Frame for industrial robot on top of foundation overplate (x by y by z steel plate, t thickness)
!
!
 
|-align="left"
! Joint 1 Gearbox
! 1
! Enables rotation of baseplate relative to foundation overplate and insertion of motor shaft for rotation control
!
!
 
|-align="left"
! Joint 1 Gearbox Bolt
! 10?
! Fastener piece
!
!
 
|-align="left"
! Joint 1 Gearbox Washer
! 10?
! Fastener piece
!
!
 
|-align="left"
! Joint 1 Gearbox Nut
! 10?
! Fastener piece
!
!
 
|-align="left"
! Joint 1 Motor Bolt
! 4?
! Fastener Piece
!
!
 
|-align="left"
! Joint 1 Motor Washer
! 4?
! Fastener Piece
!
!
 
|-align="left"
! Joint 1 Motor Nut
! 4?
! Fastener Piece
!
!
 
|-align="left"
! Baseplate L-piece
! 2
! For mounting of joint 2 hydraulic motor
!
!
 
|-align="left"
! Baseplate L-piece Bolt
! 6
! Fastener Piece
!
!
 
|-align="left"
! Baseplate L-piece Washer
! 6
! Fastener Piece
!
!
 
|-align="left"
! Baseplate L-piece Nut
! 6
! Fastener Piece
!
!
 
|-align="left"
! Joint 2 Hydraulic Motor Bolt
! 4?
! Fastener Piece
!
!
 
|-align="left"
! Joint 2 Hydraulic Motor Washer
! 4?
! Fastener Piece
!
!
 
|-align="left"
! Joint 2 Hydraulic Motor Nut
! 4?
! Fastener Piece
!
!
 
|-align="left"
! Joint 2 Gearbox
! 1
! Enables tilting of main arm relative to baseplate and control through shaft
!
!
 
|-align="left"
! Joint 2 Gearbox Bolt
! 10?
! Fastener Piece
!
!
 
|-align="left"
! Joint 2 Gearbox Washer
! 10?
! Fastener Piece
!
!
 
|-align="left"
! Joint 2 Gearbox Nut
! 10?
! Fastener Piece
!
!
 
|-align="left"
! Main Arm
! 1
! Frame piece from baseplate to elbow (x by y by z steel bar)
!
!
 
|-align="left"
! Joint 3 Gearbox
! 1
! Enables tilting of forearm relative to main arm, and control through shaft
!
!
 
|-align="left"
! Joint 3 Gearbox Bolt
! 10?
! Fastener Piece
!
!
 
|-align="left"
! Joint 3 Gearbox Washer
! 10?
! Fastener Piece
!
!
 
|-align="left"
! Joint 3 Gearbox Nut
! 10?
! Fastener Piece
!
!
 
|-align="left"
! Joint 3 Hydraulic Motor Bolt
! 4?
! Fastener Piece
!
!
 
|-align="left"
! Joint 3 Hydraulic Motor Washer
! 4?
! Fastener Piece
!
!
 
|-align="left"
! Joint 3 Hydraulic Motor Nut
! 4?
! Fastener Piece
!
!
 
|-align="left"
! Forearm
! 1
! Frame piece connecting elbow to wrist (x by y by z steel bar)
!
!
 
|-align="left"
! Forearm L-piece
! 1
! For mounting of joint 4 hydraulic motor (x by y by z steel L-piece, t thickness)
!
!
 
|-align="left"
! Forearm L-piece Bolt
! 4
! Fastener Piece
!
!
 
|-align="left"
! Forearm L-piece Washer
! 4
! Fastener Piece
!
!
 
|-align="left"
! Forearm L-piece Nut
! 4
! Fastener Piece
!
!
 
|-align="left"
! Joint 4 Hydraulic Motor Bolt
! 4?
! Fastener Piece
!
!
 
|-align="left"
! Joint 4 Hydraulic Motor Washer
! 4?
! Fastener Piece
!
!
 
|-align="left"
! Joint 4 Hydraulic Motor Nut
! 4?
! Fastener Piece
!
!
 
|-align="left"
! Joint 4 Gearbox
! 1
! Enables rotation of wrist relative to forearm and control through shaft
!
!
 
|-align="left"
! Joint 4 Gearbox Bolt
! 10?
! Fastener Piece
!
!
 
|-align="left"
! Joint 4 Gearbox Washer
! 10?
! Fastener Piece
!
!
 
|-align="left"
! Joint 4 Gearbox Nut
! 10?
! Fastener Piece
!
!
 
|-align="left"
! Wrist L-piece
! 1
! For mounting of joint 5 hydraulic motor
!
!
 
|-align="left"
! Joint 5 Hydraulic Motor Bolt
! 4?
! Fastener piece
!
!
 
|-align="left"
! Joint 5 Hydraulic Motor Washer
! 4?
! Fastener piece
!
!
 
|-align="left"
! Joint 5 Hydraulic Motor Nut
! 4?
! Fastener Piece
!
!
 
|-align="left"
! Joint 5 Gearbox
! 1
! Enables tilting of wrist relative to forearm and control through shaft
!
!
 
|-align="left"
! Joint 5 Gearbox Bolt
! 10?
! Fastener Piece
!
!
 
|-align="left"
! Joint 5 Gearbox Washer
! 10?
! Fastener Piece
!
!
 
|-align="left"
! Joint 5 Gearbox Nut
! 10?
! Fastener Piece
!
!
 
|-align="left"
! Wrist Plate
! 1
! Frame piece connecting Joint 5 L-piece to Joint 6 L-piece (x by y by z steel bar)
!
!
 
|-align="left"
! Joint 6 L-piece
! 1
! For mounting of joint 6 hydraulic motor (x by y by z L-piece, t thickness)
!
!
 
|-align="left"
! Joint 6 L-piece Bolt
! 4
! Fastener Piece
!
!
 
|-align="left"
! Joint 6 L-piece Washer
! 4
! Fastener Piece
!
!
 
|-align="left"
! Joint 6 L-piece Washer
! Fastener Piece
!
!
!
 
|-align="left"
! Joint 6 L-piece Nut
! Fastener Piece
!
!
!
 
|-align="left"
! Joint 6 Hydraulic Motor Bolt
! 4?
! Fastener Piece
!
!
 
|-align="left"
! Joint 6 Hydraulic Motor Washer
! 4?
! Fastener Piece
!
!
 
|-align="left"
! Joint 6 Hydraulic Motor Nut
! 4?
! Fastener Piece
!
!
 
|-align="left"
! Joint 6 Gearbox connector
! 1
! Enables rotation of end effector relative to wrist and control through shaft
!
!
 
|-align="left"
! Joint 6 Gearbox Bolt
! 10?
! Fastener Piece
!
!
 
|-align="left"
! Joint 6 Gearbox Washer
! 10?
! Fastener Piece
!
!
 
|-align="left"
! Joint 6 Gearbox washer
! 10?
! Fastener Piece
!
!
 
|-align="left"
! Joint 6 Gearbox nut
! 10?
! Fastener Piece
!
!
 
|-align="left"
! Powercube
! 1?
! As prime mover-connected pump for hydraulic system
!
!
 
|-align="left"
! Hydraulic tank
! 1
! As reservoir for hydraulic system
!
!
 
|-align="left"
! Pump to Tank Tubing
! 1
! Hydraulic connector (x max pressure, y length, z dia)
!
!
 
|-align="left"
! Primary 4-way Pipe
! 1
! For tubing connection to: Pump, Secondary 4-way Pipe, Tertiary 4-way Pipe, Pressure Relief Valve
!
!
 
|-align="left"
! Pump to Primary 4-way Pipe Tubing
! 1
! Hydraulic connector (x max pressure, y length, z dia)
!
!
 
|-align="left"
! Pressure Relief Valve
! 1
! For maintaining continuity of flow when flow to all hydralic motors are cut
!
!
 
|-align="left"
! Primary 4-way Pipe to Pressure Relief Valve Tubing
! 1
! Hydraulic connector (x max pressure, y length, z dia)
!
!
 
|-align="left"
! Pressure Relief Valve to Tank Tubing
! 1
! Hydraulic connector (x max pressure, y length, z dia)
!
!
 
|-align="left"
! Secondary 4-way Pipe
! 1
! For tubing connection to: Primary 4-way Pipe, Joint 1 Needle Valve, Joint 2 Needle Valve, Joint 3 Needle Valve
!
!
 
|-align="left"
! Primary 4-way Pipe to Secondary 4-way Pipe Tubing
! 1
! Hydraulic connector (x pressure, y length, z dia)
!
!
 
|-align="left"
! Tertiary 4-way Pipe
! 1
! For tubing connection to: Primary 4-way Pipe, Joint 4 Needle Valve, Joint 5 Needle Valve, Joint 6 Needle Valve
!
!
 
|-align="left"
! Primary 4-way Pipe to Tertiary 4-way Pipe Tubing
! 1
! Hydraulic connector (x pressure, y length, z dia)
!
!
 
|-align="left"
! Joint 1 Needle Valve
! 1
! Flow control for joint 1 hydraulic motor
! 40-60
!
 
|-align="left"
! Joint 2 Needle Valve
! 1
! Flow control for joint 2 hydraulic motor
! 40-60
!
 
|-align="left"
! Joint 3 Needle Valve
! 1
! Flow control for joint 3 hydraulic motor
! 40-60
!
 
|-align="left"
! Secondary 4-way pipe to Joint 1 Needle Valve Tubing
! 1
! Hydraulic Connector
!
!
 
|-align="left"
! Secondary 4-way pipe to Joint 2 Needle Valve Tubing
! 1
! Hydraulic Connector
!
!
 
|-align="left"
! Secondary 4-way pipe to Joint 3 Needle Valve Tubing
! 1
! Hydraulic Connector
!
!
 
|-align="left"
! Joint 4 Needle Valve
! 1
! Flow control for joint 4 hydraulic motor
!
!
 
|-align="left"
! Joint 5 Needle Valve
! 1
! Flow control for joint 5 hydraulic motor
!
!
 
|-align="left"
! Joint 6 Needle Valve
! 1
! Flow control for joint 6 hydraulic motor
!
!
 
|-align="left"
! Tertiary 4-way Pipe to Joint 4 Needle Valve Tubing
! 1
! Hydraulic Connector
!
!
 
|-align="left"
! Tertiary 4-way Pipe to Joint 5 Needle Valve Tubing
! 1
! Hydraulic Connector
!
!
 
|-align="left"
! Tertiary 4-way Pipe to Joint 6 Needle Valve Tubing
! 1
! Hydraulic Connector
!
!
 
|-align="left"
! Joint 1 Solenoid Valve
! 1
! 2?-position directional control for joint 1 hydraulic motor
!
!
 
|-align="left"
! Joint 2 Solenoid Valve
! 1
! 2?-position directional control for joint 2 hydraulic motor
!
!
 
|-align="left"
! Joint 3 Solenoid Valve
! 1
! 2?-position directional control for joint 3 hydraulic motor
!
!
 
|-align="left"
! Joint 4 Solenoid Valve
! 1
! 2?-position directional control for joint 4 hydraulic motor
!
!
 
|-align="left"
! Joint 5 Solenoid Valve
! 1
! 2?-position directional control for joint 5 hydraulic motor
!
!
 
|-align="left"
! Joint 6 Solenoid Valve
! 1
! 2?-position directional control for joint 6 hydraulic motor
!
!
 
|-align="left"
! Joint 1 Needle Valve to Solenoid Valve Tubing
! 1
! Hydraulic connector
!
!
 
|-align="left"
! Joint 2 Needle Valve to Solenoid Valve Tubing
! 1
! Hydraulic connector
!
!
 
|-align="left"
! Joint 3 Needle Valve to Solenoid Valve Tubing
! 1
! Hydraulic connector
!
!
 
|-align="left"
! Joint 4 Needle Valve to Solenoid Valve Tubing
! 1
! Hydraulic connector
!
!
 
|-align="left"
! Joint 5 Needle Valve to Solenoid Valve Tubing
! 1
! Hydraulic connector
!
!
 
|-align="left"
! Joint 6 Needle Valve to Solenoid Valve Tubing
! 1
! Hydraulic connector
!
!
 
|-align="left"
! Joint 1 Solenoid Valve to Tank Tubing
! 1
! Hydraulic Connector
!
!
 
|-align="left"
! Joint 2 Solenoid Valve to Tank Tubing
! 1
! Hydraulic Connector
!
!
 
|-align="left"
! Joint 3 Solenoid Valve to Tank Tubing
! 1
! Hydraulic Connector
!
!
 
|-align="left"
! Joint 4 Solenoid Valve to Tank Tubing
! 1
! Hydraulic Connector
!
!
 
|-align="left"
! Joint 5 Solenoid Valve to Tank Tubing
! 1
! Hydraulic Connector
!
!
 
|-align="left"
! Joint 6 Solenoid Valve to Tank Tubing
! 1
! Hydraulic Connector
!
!
 
|-align="left"
! Joint 1 Solenoid Valve to Hydraulic Motor Tubing
! 2
! Hydraulic Connector
!
!
 
|-align="left"
! Joint 2 Solenoid Valve to Hydraulic Motor Tubing
! 2
! Hydraulic Connector
!
!
 
|-align="left"
! Joint 3 Solenoid Valve to Hydraulic Motor Tubing
! 2
! Hydraulic Connector
!
!
 
|-align="left"
! Joint 4 Solenoid Valve to Hydraulic Motor Tubing
! 2
! Hydraulic Connector
!
!
 
|-align="left"
! Joint 5 Solenoid Valve to Hydraulic Motor Tubing
! 2
! Hydraulic Connector
!
!
 
|-align="left"
! Joint 6 Solenoid Valve to Hydraulic Motor Tubing
! 2
! Hydraulic Connector
!
!
 
|-align="left"
! DC Power Supply
! 1
! To power microcontroller, stepper motor drivers, solenoid drivers
!
!
 
|-align="left"
! Power Supply to Microcontroller Wires
!
! Electric Connector
!
!
 
|-align="left"
! Power Supply to Stepper Motor Driver Wires
!
! Electric Connector for 6 channels
!
!
 
|-align="left"
! Power Supply to Solenoid Driver Wires
!
! Electric Connector for 6 channels
!
!
 
|-align="left"
! Microcontroller
! 1
! To receive computer signals and shaft encoder signals; to command stepper motor drivers and solenoid drivers
! 50-100?
!
 
|-align="left"
! Stepper Motor Driver
! (6 channels total)
! To receive microcontroller signals and give electric current to stepper motors for joint 1-6 needle valves
! 50? total
!
 
|-align="left"
! Microcontroller to Stepper Motor Driver Wires
!
! Electric Connector for 6 channels
!
!
 
|-align="left"
! Stepper Motor
! 6
! To allow electric operation of joint 1-6 needle valves
!
!
 
|-align="left"
! Stepper Motor Driver to Stepper Motor Wires
!
! Electric Connector for 6 Motors
!
!
 
|-align="left"
! Stepper Motor Bracket and Fasteners
! 6
! To rigidly connect joint 1-6 stepper motors and needle valves as 6 pairs
!
!
 
|-align="left"
! Solenoid Driver
! (6 channels)
! To receive microcontroller signals and give electric current to joint 1-6 solenoid valves
!
!
 
|-align="left"
! Shaft Encoder
! 6
! To measure speed of joint 1-6 hydraulic motor shaft rotation
!
!
 
|-align="left"
! Microcontroller to Shaft Encoder Wires
!
! Electric Connector for 6 Shaft Encoders
!
!
 
|}
 
 
 
[[Category: Industrial Robot]]

Latest revision as of 07:22, 24 July 2011

Redirect to:

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Industrial_Robot_Bill_of_Materials&oldid=34494"