Leg Holder: Difference between revisions
Jump to navigation
Jump to search
(Created page with "Leg Holders: == Tools Required: == *Torch *Welder == Materials Required:== *3/16”x 2 1/2” square steel tubing – 6” long (1) *3/4” nut (1) *3/4” x 2” bolt (1) == ...") |
(No difference)
|
Latest revision as of 17:20, 18 August 2011
Leg Holders:
Tools Required:
- Torch
- Welder
Materials Required:
- 3/16”x 2 1/2” square steel tubing – 6” long (1)
- 3/4” nut (1)
- 3/4” x 2” bolt (1)
Diagrams:
Fabrication Instructions:
1) Torch a 3/4” hole in the center of one of the faces of the tubing; make sure it's large enough for a 3/4” bolt
2) Weld the nut over the hole, ensuring the nut is level, and the hole is clear. Make sure no spatter goes into the threads by covering the top of the nut.
3) Thread the bolt into the nut.