Sawmill Bill of Materials

• system at 3600 psi, 24 gpm
• Note: x is the lengthwise axis, y is the cross cutting axis, and z is the vertical axis

Saw Platform

Saw Motor Frame

2 hydraulic motors - 40 hp each, 3600 psi

2 cushion valves, 24 gpm, 3600 psi

2 spool, 25 gpm valve

Hydraulic Hoses

Motor couplers

Motor coupler, main

Motor coupler, secondary

1 pulley,2.5x

2 pulley system, 2.5x each

1 main belt

2 secondary pulley belts

Main saw blade - 20"

2 edger blades - 9"

2 shafts for blades

3 attachments systems for blade - Multimachine style

2 sets of 2 pillow blocks to hold blade shafts

Vertical asssembly Z axis motion

6ft? "I" beams x2

2 stopper L pieces for top and bottom about 2ft wide

pulley cable

pulley mount and wheel on top

pulley handle with locking teeth (spring tensioned?)

Frame

2in x 1/8in x 20in steel x12

metal to hold bearings

Base frame

Approx. 3.5-4in wide/high x 19ft long "I" beams x2

Track frame - Y axis motion

Approx. 3.5-4in wide/high x 8ft long "I" beams x5

Gear rack, about 6ft long x 1-2in wide

Log clamps

threaded shaft

handle

metal pieces ("L" shape?)

shaft bearing?

Jacks

threaded shaft

handle

shaft bearing?

base pad

Space frame - X axis motion

8 x : 2" x 2" x 3/16" square tubing 10' @ 4.32 lbs/ft =

2" x 1/8" x 18" plates x40

2in x ? steel braces x?

Large Gears x2

Small Gears x2

Gear Pipe

Gear pipe bearings x3

Gear pipe handle

metal for holding small gears

metal for holding bearings

=Bearings and bearing shafts= x48

16 for space frame track

16 for saw assembly frame

16 for vertical saw assembly

Bolts and nuts

?

TODO

Need cost sourcing and weight for all pieces.