CEB Press/Manufacturing Instructions/Linked Extension Cord: Difference between revisions
Jump to navigation
Jump to search
(→Tools) |
(→Tools) |
||
| Line 5: | Line 5: | ||
*'''16AWG-compatible Wire Strippers''' | *'''16AWG-compatible Wire Strippers''' | ||
*'''Soldering | *'''Soldering Iron''' | ||
*'''Solder''' | |||
*'''Soldering Stand''' | |||
*'''Wet paper towel or wet sponge''' | |||
=Materials= | =Materials= | ||
Revision as of 01:47, 28 November 2011
Tools
- Straight Pattern Tin Snips
- 16AWG-compatible Wire Strippers
- Soldering Iron
- Solder
- Soldering Stand
- Wet paper towel or wet sponge
Materials
- [1] 15m (approximately 50ft) , 16AWG Extension Cord
- [1] Insulated Female 16-22AWG Quick-Connector
Steps
- Cut the extension cord such that the male plug cord is approximately 1m long.
- Strip the loose sleeves of the male plug cord and the female plug cord by about 30cm in order to expose the 3 wires: white, black, green.
- Cut the green wire for both the male and female plug cords where the stripped sleeve ends
- Strip the white and black wires of the male plug cord by 1.5cm.
- Crimp a female quick-connect to the now-exposed white wire of the male plug cord
- Strip the white and black wires of the female plug cord by 2.5cm.
- Insert the alligator clips' coloured sleeves into the female plug cord's black and white wires.
- Solder alligator clips to the white and black wires of the female plug cord.
- Link the male and female plug cords together by their plugs.