PowerCube Finish and Painting: Difference between revisions
Jump to navigation
Jump to search
Tom Griffing (talk | contribs) (Created page with "===Finish and Painting=== * Remove the engine if present * Cover holes of tanks and any other place that should not be painted. * Check all external surfaces for sharp edges and ...") |
(No difference)
|
Latest revision as of 04:18, 12 December 2011
Finish and Painting
- Remove the engine if present
- Cover holes of tanks and any other place that should not be painted.
- Check all external surfaces for sharp edges and smooth with angle grinder.
- Remove any surface rust with wire brush and / or sandpaper.
- Apply a thorough coating of paint to all steel surfaces.