Latest revision as of 00:29, 23 December 2011

Main > Housing and construction > CEB Press > CEB press building instructions

Part Information

The brickholder plate mounts under the primary arms and becomes the ejecting surface for the compressed earth blocks.

The brickholder plate can be substituted by a set of rollers.

@@ Line 1: / Line 1: @@
 {{Category=CEB press building instructions}}
-{{Template:CEB Press Manufacturing Instructions Navbox}}
-The brickholder plate attaches to the primary arms and is where the bricks go when the machine spits them out. You could also replace the plate with some rollers.
+=Part Information=
-=Tools Required=
+The brickholder plate mounts under the primary arms and becomes the ejecting surface for the compressed earth blocks.
+The brickholder plate can be substituted by a set of rollers.
+=Tools=
 *Hole Punch with 1" dies
+*Measuring Tape
+*Metal Marking Utensil
 =Materials=
-*1/8" Plate: 17"x29"
-=Diagrams=
+*Steel Plate 1/8" x 16" x 28.75"
-{{Wanted|Better diagram}}
-[[Image:brickholder.png|thumb|400px|The brickholder plate hole locations.]]
+=Steps=
+*Punch the 1" holes in the proper locations.
+[[Image:brick-holder.png|800px|The brickholder plate hole locations.]]
+=CAD File=
 <html>
 <iframe src="http://sketchup.google.com/3dwarehouse/mini?mid=c12a8812826fae5fb38804396e417a9b&etyp=im&width=400&height=300" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" width="400" height="300"></iframe>
 </html>
-=Fabrication steps=
-Punch the 1" holes in the proper locations. They are 1 1/4" away from 17" side, and 2" away from 29" side.