Revision as of 00:51, 23 December 2011

Part Information

The primary arms attach the cylinder/frame assembly to the secondary arms, which support it. They also attach to the Brickholder plate, the Dirt-keeper plate, the Controller Mount, and the Valve Mount.

Left

Right

@@ Line 1: / Line 1: @@
-{{Template:CEB Press Manufacturing Instructions Navbox}}
 [[Image:Farmewitharms.jpg|thumb]]
+=Part Information=
 The primary arms attach the cylinder/frame assembly to the secondary arms, which support it. They also attach to the [[Brickholder plate]], the [[Dirt-keeper plate]], the [[Controller Mount]], and the [[Valve Mount]].
-== Tools Required ==
+=Tools=
-Hole punch with 13/16" and 3/4" dies
+*Hole punch with 13/16" and 3/4" dies
-== Materials Required ==
+*Measuring Tape
-*2 pieces 72" long - 4"x6"x1/2" angle steel
+*Metal Marking Utensil
-== Diagrams ==
+=Materials=
+*[2] Steel Angle 4" A by 6" B, 1/2" Thickness, 72" Length
+=Steps=
+*Mark and punch holes as shown below.
 Left
@@ Line 26: / Line 31: @@
 </html>
-<!--
+*Label arms as left and right.
-Innaccurate!
-shonda's print for the CEB
-[[Image:primarynorm.png]]
-[[Image:monsternorm.png]]
-[[File:MAIN_ARM_CONTROL_SIDE_WITH_DETAIL.jpg]]
-[[Image:beginningassembly.jpg|thumb|1400px]]-->
-== Fabrication Steps ==
-Mark and punch all holes.
-*Label which arm is the left and which is the right.