Induction Furnace Power Electronics Design Rationale and Specification: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
No edit summary
Line 4: Line 4:


=Specifications=
=Specifications=
*Input – 24V DC using IGBTs that can handle that
*Rated Power output: 12.5 KW
*Output - LOTS AMPS
*Output Voltage: 342-430 V
*No need for pure sine wave signal generator
*Output Frequency: 10 KHz - 30 KHz
*Input voltage: 24 VDC
*Input current: 580 A
*Duty cycle: 100%
*Efficiency: 90%
 


==Particulars==
==Particulars==
*Continuous output power: 2500 Watts
*IGBT Technology and control
*dc input / operating voltage: 10 to 120 DC
*Temperature controllable
*Output voltage: 120-480 Volts ac
 
*Output frequency: 60 Hz +/- 0.5 Hz
*No load minimum operating temperature: 25 degrees F
*Full load maximum operating temperature: 140 degrees F
*Efficiency: >90%
*AC Output Socket Type: 3 bolt down connectors
*High input voltage protection: 15V
*Low input voltage shutdown: 10V
*Internal fuse protection


=Links=
=Links=
*http://www.uie.org/webfm_send/391
*http://www.uie.org/webfm_send/391


=Deployment Strategy=
*Initial prototype is a 2.5 kW module in 1 phase, later modules are slave modules for stackability


[[Category:Specifications]][[Category:Induction Furnace]]
[[Category:Specifications]][[Category:Induction Furnace]]

Revision as of 04:07, 20 January 2012

See also [[1]]

Design Rationale

Specifications

  • Rated Power output: 12.5 KW
  • Output Voltage: 342-430 V
  • Output Frequency: 10 KHz - 30 KHz
  • Input voltage: 24 VDC
  • Input current: 580 A
  • Duty cycle: 100%
  • Efficiency: 90%


Particulars

  • IGBT Technology and control
  • Temperature controllable


Links

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Induction_Furnace_Power_Electronics_Design_Rationale_and_Specification&oldid=51797"