CNCCMV2/Structure: Difference between revisions
< CNCCMV2
Jump to navigation
Jump to search
No edit summary |
|||
| Line 2: | Line 2: | ||
*Mark metal with scribe and measuring tape: 4 lengths of 100mm, 2 lengths of 150mm, 2 length of 140mm, 1 length of 40mm | *Mark metal with scribe and measuring tape: 4 lengths of 100mm, 2 lengths of 150mm, 2 length of 140mm, 1 length of 40mm | ||
*Wear safety glasses and leather gloves | |||
*Cut the marked lengths with bandsaw | |||
=Cut Aluminum Flat Bar 0.375" x 3.5" x 10-12"= | |||
*Mark metal with scribe and measuring tape: 2 lengths of 110mm | |||
*Wear safety glasses and leather gloves | |||
*Cut the marked lengths with bandsaw | |||
=Cut Aluminum Round Bar 15mm Dia, 12" Lg= | |||
*Mark metal with scribe and measuring tape: 6 lengths of 30mm | |||
*Wear safety glasses and leather gloves | *Wear safety glasses and leather gloves | ||
*Cut the marked lengths with bandsaw | *Cut the marked lengths with bandsaw | ||
Revision as of 15:07, 9 April 2012
Cut Aluminum Flat Bar 1.5" x 3" x 48"
- Mark metal with scribe and measuring tape: 4 lengths of 100mm, 2 lengths of 150mm, 2 length of 140mm, 1 length of 40mm
- Wear safety glasses and leather gloves
- Cut the marked lengths with bandsaw
Cut Aluminum Flat Bar 0.375" x 3.5" x 10-12"
- Mark metal with scribe and measuring tape: 2 lengths of 110mm
- Wear safety glasses and leather gloves
- Cut the marked lengths with bandsaw
Cut Aluminum Round Bar 15mm Dia, 12" Lg
- Mark metal with scribe and measuring tape: 6 lengths of 30mm
- Wear safety glasses and leather gloves
- Cut the marked lengths with bandsaw