CNCCMV2/Structure

Safety

• Wear safety glasses and gloves during cutting, drilling, filing, and cleaning operations

Point Marking with Datum Point/Edge

• Measure the appropriate distance from the datum point/edge and scribe the length point with 2 small lines

• Repeat for all dimensions, all points to be marked

Cut Aluminum Flat Bar 1.5" x 3" x 48"

• Mark metal with scribe and measuring tape: 4 lengths of 100mm, 2 lengths of 150mm, 2 length of 140mm, 1 length of 40mm

• Cut the marked lengths with bandsaw

Cut Aluminum Flat Bar 0.375" x 3.5" x 10-12"

• Mark metal with scribe and measuring tape: 2 lengths of 110mm

• Cut the marked lengths with bandsaw

Cut Aluminum Round Bar 15mm Dia, 12" Lg

• Mark metal with scribe and measuring tape: 6 lengths of 30mm

• Cut the marked lengths with bandsaw

Cut Precision Shaft 5mm Dia, 200mm Lg

• Mark metal with scribe and measuring tape: 1 length of 115mm

• Cut the marked lengths with bandsaw

Cut Leadscrew

• Cut with bandsaw: 3 lengths of 320mm, 1 length of 120mm

Fabricate Platform

• File:PlatformV2.pdf

• Qty=1

Fabricate X Major Block

• File:XMajorBlockV2.pdf

• Qty=2

Fabricate X Minor Block

• File:XMinorBlockV2.pdf

• Qty=2

Fabricate Y Major Block

• File:YMajorBlockV2.pdf

• Qty=1

Fabricate Y Minor Block

• File:YMinorBlockV2.pdf

• Qty=1

Fabricate Z Mount Block

• File:ZMountBlockV2.pdf

• Qty=1

Fabricate Z Major Block

• File:ZMajorBlockV2.pdf

• Qty=1

Fabricate Z Minor Block

• File:ZMinorBlockV2.pdf

• Qty=1

Fabricate End Mount Block

• File:EndMountBlockV2.pdf

• Qty=1

Fabricate Spindle Block

• File:SpindleBlockV2.pdf

• Qty=1