CNCCMV2/Structure/Cutting: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Cut Aluminum Flat Bar 1.5" x 3" x 48"= *Mark metal with scribe and measuring tape: 4 lengths of 100mm, 2 lengths of 150mm, 2 length of 140mm, 1 length of 40mm *Cut the marked ...") |
(No difference)
|
Latest revision as of 21:49, 24 April 2012
Cut Aluminum Flat Bar 1.5" x 3" x 48"
- Mark metal with scribe and measuring tape: 4 lengths of 100mm, 2 lengths of 150mm, 2 length of 140mm, 1 length of 40mm
- Cut the marked lengths with bandsaw
Cut Aluminum Flat Bar 0.375" x 3.5" x 10-12"
- Mark metal with scribe and measuring tape: 2 lengths of 110mm
- Cut the marked lengths with bandsaw
Cut Aluminum Round Bar 25mm Dia, 12" Lg
- Mark metal with scribe and measuring tape: 12 lengths of 10mm
- Cut the marked lengths with bandsaw
Cut Aluminum Round Bar 15mm Dia, 12" Lg
- Mark metal with scribe and measuring tape: 6 lengths of 30mm
- Cut the marked lengths with bandsaw
Cut Precision Shaft 5mm Dia, 200mm Lg
- Mark metal with scribe and measuring tape: 1 length of 115mm
- Cut the marked lengths with bandsaw
Cut Leadscrew
- Cut with bandsaw: 3 lengths of 320mm, 1 length of 120mm