CNCCMV2/Structure/Collars Couplings: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Fabricate Shaft Collar= *File: ShaftCollarV2.pdf *Qty= 12 *Mark and drill setscrew holes *Lathe-drill shaft hole *Tap setscrew holes =Fabricate Axis Coupling= *[[File...") |
(No difference)
|
Latest revision as of 21:51, 24 April 2012
Fabricate Shaft Collar
- Qty= 12
- Mark and drill setscrew holes
- Lathe-drill shaft hole
- Tap setscrew holes
Fabricate Axis Coupling
- Qty= 4
- Mark and drill setscrew holes
- Lathe-drill smaller shaft holes, then larger shaft holes
- Tap setscrew holes
Fabricate Spindle Coupling
- Qty= 1
- Mark and drill setscrew holes
- Lathe-drill smaller shaft holes, then larger shaft holes
- Tap setscrew holes
Fabricate Spindle Bit Coupling
- Qty= 1
- Mark and drill setscrew holes
- Lathe-drill smaller shaft holes, then larger shaft holes
- Tap setscrew holes