CNCCMV2/Structure: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
No edit summary
Line 25: Line 25:
[http://opensourceecology.org/wiki/CNCCMV2/Structure/Blocks Blocks]
[http://opensourceecology.org/wiki/CNCCMV2/Structure/Blocks Blocks]


=Fabricate Shaft Collar=
=Collars and Couplings=


*[[File: ShaftCollarV2.pdf]]
[http://opensourceecology.org/wiki/CNCCMV2/Structure/Collars_Couplings Collars and Couplings]
 
*Qty= 12
 
*Mark and drill setscrew holes
 
*Lathe-drill shaft hole
 
*Tap setscrew holes
 
=Fabricate Axis Coupling=
 
*[[File: AxisCouplingV2.pdf]]
 
*Qty= 4
 
*Mark and drill setscrew holes
 
*Lathe-drill smaller shaft holes, then larger shaft holes
 
*Tap setscrew holes
 
=Fabricate Spindle Coupling=
 
*[[File: SpindleCouplingV2.pdf]]
 
*Qty= 1
 
*Mark and drill setscrew holes
 
*Lathe-drill smaller shaft holes, then larger shaft holes
 
*Tap setscrew holes
 
=Fabricate Spindle Bit Coupling=
 
*[[File: BitCouplingV2.pdf]]
 
*Qty= 1
 
*Mark and drill setscrew holes
 
*Lathe-drill smaller shaft holes, then larger shaft holes
 
*Tap setscrew holes

Revision as of 21:52, 24 April 2012

Safety

  • Wear safety glasses and gloves during cutting, drilling, filing, and cleaning operations

Point Marking with Datum Point/Edge

  • Measure the appropriate distance from the datum point/edge and scribe the length point with 2 small lines
  • Repeat for all dimensions, all points to be marked

Match Drilling

  • Set 2 components one on top of the other, mount securely, then drill through both pieces at the same time for exact matching accuracy.
  • Match drilling works effectively with templates
  • Match drilling works effectively for pieces before they are cut apart

Cutting

Cutting

Blocks

Blocks

Collars and Couplings

Collars and Couplings

Retrieved from "https://wiki.opensourceecology.org/index.php?title=CNCCMV2/Structure&oldid=60354"