CNCCMV2/Structure: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
No edit summary
 
(28 intermediate revisions by the same user not shown)
Line 1: Line 1:
=Safety=
=Preparation=


*Wear safety glasses and gloves during cutting, drilling, filing, and cleaning operations
[http://opensourceecology.org/wiki/CNCCMV2/Structure/Safety Safety]


=Cut Aluminum Flat Bar 1.5" x 3" x 48"=
[http://opensourceecology.org/wiki/CNCCMV2/Structure/Techniques Techniques]


*Mark metal with scribe and measuring tape: 4 lengths of 100mm, 2 lengths of 150mm, 2 length of 140mm, 1 length of 40mm
=Fabrication=


*Cut the marked lengths with bandsaw
[http://opensourceecology.org/wiki/CNCCMV2/Structure/Cutting Cutting]


=Cut Aluminum Flat Bar 0.375" x 3.5" x 10-12"=
[http://opensourceecology.org/wiki/CNCCMV2/Structure/Blocks Blocks]


*Mark metal with scribe and measuring tape: 2 lengths of 110mm
[http://opensourceecology.org/wiki/CNCCMV2/Structure/Collars_Couplings Collars and Couplings]
 
*Cut the marked lengths with bandsaw
 
=Cut Aluminum Round Bar 15mm Dia, 12" Lg=
 
*Mark metal with scribe and measuring tape: 6 lengths of 30mm
 
*Cut the marked lengths with bandsaw
 
=Cut Precision Shaft 5mm Dia, 200mm Lg=
 
*Mark metal with scribe and measuring tape: 1 length of 115mm
 
*Cut the marked lengths with bandsaw

Latest revision as of 21:54, 24 April 2012

Preparation

Safety

Techniques

Fabrication

Cutting

Blocks

Collars and Couplings

Retrieved from "https://wiki.opensourceecology.org/index.php?title=CNCCMV2/Structure&oldid=60358"