Latest revision as of 21:54, 24 April 2012

Preparation

@@ Line 1: / Line 1: @@
-=Safety=
+=Preparation=
 [http://opensourceecology.org/wiki/CNCCMV2/Structure/Safety Safety]
-=Point Marking with Datum Point/Edge=
+[http://opensourceecology.org/wiki/CNCCMV2/Structure/Techniques Techniques]
-*Measure the appropriate distance from the datum point/edge and scribe the length point with 2 small lines
+=Fabrication=
-*Repeat for all dimensions, all points to be marked
-=Match Drilling=
-*Set 2 components one on top of the other, mount securely, then drill through both pieces at the same time for exact matching accuracy.
-*Match drilling works effectively with templates
-*Match drilling works effectively for pieces before they are cut apart
-=Cutting=
 [http://opensourceecology.org/wiki/CNCCMV2/Structure/Cutting Cutting]
-=Blocks=
 [http://opensourceecology.org/wiki/CNCCMV2/Structure/Blocks Blocks]
-=Collars and Couplings=
 [http://opensourceecology.org/wiki/CNCCMV2/Structure/Collars_Couplings Collars and Couplings]