Shelves: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Designing with Angles and Side-Bent Metal Sheets= *'''The direct way to set up the shelf is to have 4 angles standing vertically at the 4 corners of the rectangular side-bent m...") |
|||
Line 1: | Line 1: | ||
=Designing with Angles and Side-Bent Metal Sheets= | =Designing with Angles and Side-Bent Metal Sheets= | ||
*'''The direct way to set up the shelf is to have 4 angles standing vertically at the 4 corners of the rectangular side-bent metal sheet, angle-to-sheet fastened with screws, at least 1 at each corner. At this point the remaining question is how to support the shelf for rigidity. | *'''Comments''' The direct way to set up the shelf is to have 4 angles standing vertically at the 4 corners of the rectangular side-bent metal sheet, angle-to-sheet fastened with screws, at least 1 at each corner. At this point the remaining question is how to support the shelf for rigidity. |
Revision as of 16:52, 18 May 2012
Designing with Angles and Side-Bent Metal Sheets
- Comments The direct way to set up the shelf is to have 4 angles standing vertically at the 4 corners of the rectangular side-bent metal sheet, angle-to-sheet fastened with screws, at least 1 at each corner. At this point the remaining question is how to support the shelf for rigidity.