Cold Saw/V1 Design Parameters/Drive System: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Blanked the page)
 
(10 intermediate revisions by the same user not shown)
Line 1: Line 1:
=Hydraulic Motor=


*'''Length (excluding shaft): 240mm'''
*'''Width (excluding mounting section): 100mm'''
*'''Height: 100mm'''
*'''Mounting Section Width: 135mm'''
*'''Mounting Section Thickness: 20mm'''
*'''Mount Hole Pattern: 40mm x 100mm'''
*'''Mount Hole Diameter: 12.7mm'''
=Interface Plate=
*'''Length: 230mm'''
*'''Width: 75mm'''
*'''Thickness: 25mm'''
*'''Drive Hole Diameter: 40mm'''
*'''Drive Hole Spacing Along Length: 70mm'''
*'''Drive Hole Spacing Along Width: 40mm'''
*'''Motor Mount Hole Spacing Along Length: 20mm, 120mm'''
*'''Motor Mount Hole Spacing Along Width: 20mm, 60mm'''
*'''Motor Mount Hole: 12mm'''
*'''Interfacing Hole Spacing Along Length: 180mm, 210mm'''
*'''Interfacing Hole Spacing Along Width: 20mm, 60mm'''
*'''Interface Hole: M12'''
=Shaft Coupling=
*'''Outside Diameter: 50.8mm'''
*'''Bore: 32mm'''
*'''Length: 75mm'''
*'''Setscrew Hole Diameter: 6.8mm'''
*'''Setscrew Hole Thread: M8x1.25'''
*'''Setscrew Hole Spacing Along Length: 25mm'''
=Drive Setscrew=
*'''Thread: M8x1.25'''
*'''Length: 10mm'''
=Mount Disc=
*'''Shape: Round Plate'''
*'''Outside Diameter: 120mm'''
*'''Inside Diameter: 32mm'''
*'''Thickness: 12.7mm'''
*'''Number of Pinholes: 2'''
*'''Pinhole Diameter: 8mm'''
*'''Pinhole Distance from Center: 45mm'''
=Pin=
*'''Diameter: 8mm'''
*'''Length: 50mm'''
=Spindle=
*'''Outside Diameter: 31.8mm"'''
*'''Length: 90mm'''
*'''End Thread Length: 40mm'''
*'''End Thread: 1-1/4"-7'''
*'''Length Inserted Into Shaft Coupling: 25mm'''
=Spindle Nut=
*'''Thread: 1-1/4"-7'''
*'''Width: 47.6mm'''
*'''Height: 27mm'''
=Blade=
*'''Bore: 32mm"'''
*'''Diameter: 355.6mm'''
*'''Thickness: 3mm'''
*'''Number of Pinholes: 2'''
*'''Pinhole Diameter: 8mm'''
*'''Pinhole Distance from Center: 45mm'''
=Blade Guard=
*

Latest revision as of 22:54, 23 May 2012

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Parameters/Drive_System&oldid=63327"