Latest revision as of 01:47, 29 May 2012

Clamp Axis Holes

@@ Line 1: / Line 1: @@
 =Clamp Axis Holes=
-*'''Clamp Axis Centerline Height: 25mm'''
+*'''Spacing Along Length: 25mm, 75mm, 125mm'''
+*'''Shaft Hole Diameter: 12mm'''
+*'''Threaded Rod Hole Diameter: 19.05mm'''
-*'''Spacing Along Length: 25mm, 75mm, 125mm'''
+=Clamp Jaws=
-=Fixed Block=
+*'''Shape: Flat Bar'''
-*'''Length: 150mm'''
+*'''Length: 75mm'''
-*'''Width: 75mm'''
+*'''Thickness: 25mm'''
 *'''Height: 50mm'''
-*'''Mount Spacing Along Length:
-*'''Mount Spacing Along Width:
+*'''Clamp Jaw Centerline Height: 10mm'''
+*'''Clamp Jaw Hole Diameter: 12mm'''
+*'''Clamp Jaw Hole Spacing Along Length: 10mm, 40mm'''
+=Threaded Rod=
+*'''Thread: M12x1.75'''
+*'''Length: 350mm'''
+=Shaft Collars=
+*'''Outside Diameter: 25mm'''
+*'''Inside Diameter: 12mm'''
+*'''Length: 20mm'''
+*'''Setscrew: M12'''
+=Thrust Washer=
+*'''Outside Diameter: 25mm'''
+*'''Inside Diameter: 15mm'''
-*'''Mount Hole Diameter:
+*'''Thickness: 3mm'''
-=Moving Block=
+=Handle=
-*'''Length: 150mm'''
+*'''Shape: Round Bar'''
-*'''Width: 50mm'''
+*'''Diameter: 25mm'''
-*'''Height: 75mm'''
+*'''Length: 250mm'''