Cold Saw/V1 Design Rationale/Movement System: Difference between revisions
Jump to navigation
Jump to search
(Created page with "*'''Rotary Shaft and Support''' *'''Swivel Head''' (to allow angled cuts) Image: ColdSawV1SwvHead.png Notes: The swivel clamp fastener should be mounted such that the swiv...") |
No edit summary |
||
| Line 6: | Line 6: | ||
Notes: The swivel clamp fastener should be mounted such that the swivel plate is horizontally clamped to the base disc. If the fastener is vertically mounted, then clamping the swivel head can cause bending that reduces the precision of the Cold Saw. | Notes: The swivel clamp fastener should be mounted such that the swivel plate is horizontally clamped to the base disc. If the fastener is vertically mounted, then clamping the swivel head can cause bending that reduces the precision of the Cold Saw. | ||
=Feature: Forward and Backward Drive Stops= | |||
*'''Forward and Backward Drive Stops''' (to prevent cutting into vise and to hold blade in mid-air while mounting the workpiece) | |||
[[Image: ColdSawV1Stops.png]] | |||
Revision as of 18:35, 8 June 2012
- Rotary Shaft and Support
- Swivel Head (to allow angled cuts)
Notes: The swivel clamp fastener should be mounted such that the swivel plate is horizontally clamped to the base disc. If the fastener is vertically mounted, then clamping the swivel head can cause bending that reduces the precision of the Cold Saw.
Feature: Forward and Backward Drive Stops
- Forward and Backward Drive Stops (to prevent cutting into vise and to hold blade in mid-air while mounting the workpiece)
