Cold Saw/V1 Design Rationale: Difference between revisions
< Cold Saw
Jump to navigation
Jump to search
| Line 15: | Line 15: | ||
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Hold_System Hold System] | [http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Hold_System Hold System] | ||
=Holistic | =Holistic Specifications= | ||
*'''The blade must bottom out at the center of the vise''' | *'''The blade must bottom out at the center of the vise''' | ||
Revision as of 17:31, 12 June 2012
Systems Engineering
Systems Engineering Breakdown Diagram
Concepts
Holistic Specifications
- The blade must bottom out at the center of the vise
- The swivel angle must be 90 degrees or greater.
- The vise must be compatible with 45 degree cuts for at least 1" wide materials.
- The vise must be able to clamp up to 4" wide materials.