Cold Saw/Build Instructions/Drive: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Shaft Coupling to Mount Disc= Surface grind one end face of the shaft coupling to be perpendicular to the axis of rotation. Clamp, tack weld, and weld the Mount Disc onto the ...") |
(No difference)
|
Latest revision as of 22:32, 19 June 2012
Shaft Coupling to Mount Disc
Surface grind one end face of the shaft coupling to be perpendicular to the axis of rotation.
Clamp, tack weld, and weld the Mount Disc onto the Shaft Coupling.
Surface grind the active face of the Mount Disc to be perpendicular to the axis of rotation.
Shaft Coupling to Small Rod
Clamp the Shaft Coupling with the Small Rod inserted 30mm.
Drill through the Shaft Coupling and Small Rod with a 12mm DIA bit.