Cold Saw/V1 Design Rationale: Difference between revisions
< Cold Saw
Jump to navigation
Jump to search
No edit summary |
|||
| Line 23: | Line 23: | ||
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Hold_System Hold System] | [http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Hold_System Hold System] | ||
=Holistic Specifications= | =Establish Holistic Specifications= | ||
*'''The blade must bottom out at the center of the vise''' | *'''The blade must bottom out at the center of the vise''' | ||
Revision as of 22:38, 19 June 2012
Analyze
Industry Standards
http://opensourceecology.org/wiki/Cold_Saw/Industry_Standards_Analysis
Systems Engineering Breakdown
http://opensourceecology.org/wiki/Cold_Saw/V1_Systems_Engineering_Breakdown_Diagram
Conceptualize
Basic Concept
http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Basic_Concept
Establish Holistic Specifications
- The blade must bottom out at the center of the vise
- The swivel angle must be 90 degrees or greater.
- The centered swivel angle must have a precision locking mechanism
- The vise must be compatible with 45 degree cuts for at least 1" wide materials.
- The vise must be able to clamp up to 4" wide materials.
- The parts must not interfere with each other's operation.