Cold Saw/V1 Design Rationale/Movement System: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
No edit summary
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
*'''The movement system requires the blade to move closer to the workpiece. This is the operation movement.'''
The movement system requires the blade to move closer to the workpiece. This is the operation movement.


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Movement_System/Operation Operation]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Movement_System/Operation Operation]


*'''The movement system can allow the blade's plane of descent be at different angles to the workpiece. This is the angle movement.'''
The movement system can allow the blade's plane of descent be at different angles to the workpiece. This is the angle movement.


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Movement_System/Angle Angle]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Movement_System/Angle Angle]
=Forward and Backward Drive Stops=
*'''Forward and Backward Drive Stops''' (to prevent cutting into vise and to hold blade in mid-air while mounting the workpiece)
[[Image: ColdSawV1Stops.png]]
=Swivel Angle Lock=
*'''Being able to lock the swivel mechanism at certain angles provides precision cutting ability.
*

Latest revision as of 00:29, 20 June 2012

The movement system requires the blade to move closer to the workpiece. This is the operation movement.

Operation

The movement system can allow the blade's plane of descent be at different angles to the workpiece. This is the angle movement.

Angle

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Rationale/Movement_System&oldid=66360"