Cold Saw/V1 Design Rationale: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Created page with "=Conceptual Parameters= *Baseplate *2 Fixed Blocks (mounted to baseplate by XXX, 2 shaft holes, 1 threaded rod hole) *1 Moving Nut Block (rides on 2 shafts, driven by a thread...")
 
 
(145 intermediate revisions by the same user not shown)
Line 1: Line 1:
=Conceptual Parameters=
=Basic Concept=


*Baseplate
http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Basic_Concept


*2 Fixed Blocks (mounted to baseplate by XXX, 2 shaft holes, 1 threaded rod hole)
=Industry Standards=


*1 Moving Nut Block (rides on 2 shafts, driven by a threaded rod that moves a nut welded to the block)
http://opensourceecology.org/wiki/Cold_Saw/Industry_Standards_Analysis


*2 Shafts (radially held on the Fixed Blocks, axially held by 2 shaft couplings on the outsides of the Fixed Blocks)
=Systems Engineering Breakdown Diagram=


*1 Threaded Rod (radially held on the Fixed Blocks, axially held by 2 shaft couplings on the outsides of the Fixed Blocks, drives a nut welded to the Moving Block)
http://opensourceecology.org/wiki/Cold_Saw/V1_Systems_Engineering_Breakdown_Diagram
 
*1 Clamp Handle (welded to the Threaded Rod)
 
*
 
=Specific Parameters=

Latest revision as of 18:42, 20 June 2012

Basic Concept

http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Basic_Concept

Industry Standards

http://opensourceecology.org/wiki/Cold_Saw/Industry_Standards_Analysis

Systems Engineering Breakdown Diagram

http://opensourceecology.org/wiki/Cold_Saw/V1_Systems_Engineering_Breakdown_Diagram

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Rationale&oldid=66412"