Revision as of 18:29, 22 June 2012

More Information

A system to rotate the blade.

A system to move the blade closer to the workpiece.

A system to hold the workpiece.

@@ Line 1: / Line 1: @@
-=Introduction=
-Simply put, the Cold Saw cuts materials.
-More specifically, the Cold Saw rotates a circular blade with sharp teeth to chip away at the material being cut.
-The Cold Saw is "cold" because the thermal energy generated during the cutting process is transferred to the chips that are cut off, instead of the blade or the remaining material.
-Different material compositions, shapes, dimensions all determine how fast the blade should spin (rotation speed) and how quickly the blade should move into the workpiece (feed rate). If the feed rate is too high, the blade is in danger of jamming and breaking. If the feed rate is too low, the blade's durability will not be maximized.
-Cold Saw blades can be resharpened many times!
-[[Image: ColdSawV1BasCpt.png]]
-=Objectives=
-Precision cuts with surface deviation of less than 0.1mm
-Precision center angle locking mechanism with deviation of less than 1 degree
-Precision perpendicular descent with vertical cutting plane angled within 1 degree.
-Up to 45 degree cuts for at least 1" wide materials.
-Clamping materials of at least 4" width.
-=General Notes=
-Precision requires rigidity.
-Functional design avoids interference between mechanisms.
-=Rationale=
-Should the blade move towards the workpiece, or the workpiece move toward the blade, or both?
-http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Basic_Concept/Movement
 =More Information=