Cold Saw/V1 Design Rationale/Basic Concept: Difference between revisions

Latest revision as of 22:25, 25 June 2012

A system to move the blade closer to the workpiece.

A system to hold the workpiece.

@@ Line 1: / Line 1: @@
-=Introduction=
-Simply put, the Cold Saw cuts materials.
-More specifically, the Cold Saw rotates a circular blade with sharp teeth to chip away at the material being cut.
-The Cold Saw is "cold" because the thermal energy generated during the cutting process is transferred to the chips instead of the blade or the remaining material.
-Different material compositions, shapes, dimensions all determine how fast the blade should spin (rotation speed) and how quickly the blade should move into the workpiece (feed rate). If the feed rate is too high, the blade is in danger of jamming and breaking. If the feed rate is too low, the blade's durability will not be maximized.
-Cold Saw blades can be resharpened many times!
-[[Image: ColdSawV1BasCpt.png]]
-=Objectives=
-The centered swivel angle must have a precision locking mechanism
-The vise must be compatible with 45 degree cuts for at least 1" wide materials.
-The vise must be able to clamp up to 4" wide materials.
-=Rationale=
-Should the blade move towards the workpiece, or the workpiece move toward the blade, or both?
-http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Basic_Concept/Movement
-=More Information=
-A system to rotate the blade.
-http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Blade_Rotation_System
 A system to move the blade closer to the workpiece.