Cold Saw/Index: Difference between revisions
(Created page with "=Shaft Accessories= [http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Drive_Collar Large Shaft Collar] [http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Pin...") |
|||
| (24 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
= | =Complete= | ||
[ | [[Image: ColdSawV1Full.jpg|500px]] | ||
=Base= | |||
[ | [[Image: ColdSawBase.jpg|500px]] | ||
[[File: ColdSawBase.stp]] | |||
http://opensourceecology.org/wiki/Cold_Saw/Base | |||
[http://opensourceecology.org/wiki/Cold_Saw/ | =Vise= | ||
[[Image:ColdSawV1Clamp.png|500px]] | |||
[[File: ColdSawV1Clamp.stp]] | |||
http://opensourceecology.org/wiki/Cold_Saw/Vise | |||
=Swivel= | |||
[[Image: ColdSawV1Swivel.jpg|500px]] | |||
http://opensourceecology.org/wiki/Cold_Saw/Swivel | |||
=Support= | |||
[[Image: ColdSawSupport.jpg|500px]] | |||
http://opensourceecology.org/wiki/Cold_Saw/Support | |||
=Rotation= | =Rotation= | ||
[http://opensourceecology.org/wiki/Cold_Saw/ | [[Image: ColdSawV1DriveAssembly.jpg|500px]] | ||
http://opensourceecology.org/wiki/Cold_Saw/Rotation | |||
=Blade Guard= | |||
[[Image: BladeGuard.jpg|500px]] | |||
[[File: BladeGuard.stp]] | |||
http://opensourceecology.org/wiki/Cold_Saw/Blade_Guard | |||
=Calculations= | |||
Depth of Vise Blade Slot and Maximum Cut Height | |||
http://opensourceecology.org/wiki/Cold_Saw/Depth_Blade_Slot | |||
Base Mounting Dimensions to Swivel Angle | |||
= | http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Hold_System/Base/Elevated_Mounting_Calculation | ||
Should the blade move towards the workpiece, or the workpiece move toward the blade, or both? | |||
http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Basic_Concept/Movement | |||
Measure Flat Length | |||
http://opensourceecology.org/wiki/Cold_Saw/Measure_Flat_Calc | |||
=Rationale= | |||
The vise-supporting platform is large. The vise is fastened by 4 bolts. Reason: for irregular-shaped materials, the vise can be removed and the platform can be used as the work surface. Of course, elevating materials must be placed as to create a blade slot. | |||
Latest revision as of 22:46, 5 July 2012
Complete
Base
http://opensourceecology.org/wiki/Cold_Saw/Base
Vise
http://opensourceecology.org/wiki/Cold_Saw/Vise
Swivel
http://opensourceecology.org/wiki/Cold_Saw/Swivel
Support
http://opensourceecology.org/wiki/Cold_Saw/Support
Rotation
http://opensourceecology.org/wiki/Cold_Saw/Rotation
Blade Guard
http://opensourceecology.org/wiki/Cold_Saw/Blade_Guard
Calculations
Depth of Vise Blade Slot and Maximum Cut Height
http://opensourceecology.org/wiki/Cold_Saw/Depth_Blade_Slot
Base Mounting Dimensions to Swivel Angle
Should the blade move towards the workpiece, or the workpiece move toward the blade, or both?
http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Basic_Concept/Movement
Measure Flat Length
http://opensourceecology.org/wiki/Cold_Saw/Measure_Flat_Calc
Rationale
The vise-supporting platform is large. The vise is fastened by 4 bolts. Reason: for irregular-shaped materials, the vise can be removed and the platform can be used as the work surface. Of course, elevating materials must be placed as to create a blade slot.