Cold Saw/Index: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
 
(20 intermediate revisions by the same user not shown)
Line 1: Line 1:
=Shaft Accessories=
=Complete=


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Drive_Collar Large Shaft Collar]
[[Image: ColdSawV1Full.jpg|500px]]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Pin Pin]
=Base=


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Spindle Drive Shaft]
[[Image: ColdSawBase.jpg|500px]]


=Fasteners=
[[File: ColdSawBase.stp]]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Collar_Setscrew Setscrew]
http://opensourceecology.org/wiki/Cold_Saw/Base


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard_Nut Small Nut]
=Vise=


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Long2_Screw Long2 Screw]
[[Image:ColdSawV1Clamp.png|500px]]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Threaded_Rod Threaded Rod]
[[File: ColdSawV1Clamp.stp]]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Coupling_Setscrew Small Setscrew]
http://opensourceecology.org/wiki/Cold_Saw/Vise


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Large_Nut Large Nut]
=Swivel=


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Large_LHNut Large Left-Handed Nut]
[[Image: ColdSawV1Swivel.jpg|500px]]
 
http://opensourceecology.org/wiki/Cold_Saw/Swivel
 
=Support=
 
[[Image: ColdSawSupport.jpg|500px]]
 
http://opensourceecology.org/wiki/Cold_Saw/Support


=Rotation=
=Rotation=


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Hydraulic_Motor Hydraulic Motor]
[[Image: ColdSawV1DriveAssembly.jpg|500px]]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Shaft_Coupling Shaft Coupling]
http://opensourceecology.org/wiki/Cold_Saw/Rotation


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Support Blade Support]
=Blade Guard=
 
[[Image: BladeGuard.jpg|500px]]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade Blade]
[[File: BladeGuard.stp]]


=Blade Guard=
http://opensourceecology.org/wiki/Cold_Saw/Blade_Guard


[[Cold_Saw/Guard_Side|Guard Side]]
=Calculations=


[[Cold_Saw/Guard_Flat|Guard Flat]]
Depth of Vise Blade Slot and Maximum Cut Height


[[Cold_Saw/Guard_Support|Guard Support]]
http://opensourceecology.org/wiki/Cold_Saw/Depth_Blade_Slot


=Vise=
Base Mounting Dimensions to Swivel Angle


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Fixed_Block Fixed Block]
http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Hold_System/Base/Elevated_Mounting_Calculation


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Moving_Block Moving Block]
Should the blade move towards the workpiece, or the workpiece move toward the blade, or both?


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Clamp_Block Clamp Block]
http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Basic_Concept/Movement


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Vise_Jaw Vise Jaw]
Measure Flat Length


[http://opensourceecology.org/wiki/Cold_Saw/Raiser Raiser]
http://opensourceecology.org/wiki/Cold_Saw/Measure_Flat_Calc


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Handle Vise Handle]
=Rationale=


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Support_Shaft Vise Shaft]
The vise-supporting platform is large. The vise is fastened by 4 bolts. Reason: for irregular-shaped materials, the vise can be removed and the platform can be used as the work surface. Of course, elevating materials must be placed as to create a blade slot.

Latest revision as of 22:46, 5 July 2012

Complete

Error creating thumbnail: File missing

Base

Error creating thumbnail: File missing

File:ColdSawBase.stp

http://opensourceecology.org/wiki/Cold_Saw/Base

Vise

Error creating thumbnail: File missing

File:ColdSawV1Clamp.stp

http://opensourceecology.org/wiki/Cold_Saw/Vise

Swivel

Error creating thumbnail: File missing

http://opensourceecology.org/wiki/Cold_Saw/Swivel

Support

Error creating thumbnail: File missing

http://opensourceecology.org/wiki/Cold_Saw/Support

Rotation

Error creating thumbnail: File missing

http://opensourceecology.org/wiki/Cold_Saw/Rotation

Blade Guard

Error creating thumbnail: File missing

File:BladeGuard.stp

http://opensourceecology.org/wiki/Cold_Saw/Blade_Guard

Calculations

Depth of Vise Blade Slot and Maximum Cut Height

http://opensourceecology.org/wiki/Cold_Saw/Depth_Blade_Slot

Base Mounting Dimensions to Swivel Angle

http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Hold_System/Base/Elevated_Mounting_Calculation

Should the blade move towards the workpiece, or the workpiece move toward the blade, or both?

http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Basic_Concept/Movement

Measure Flat Length

http://opensourceecology.org/wiki/Cold_Saw/Measure_Flat_Calc

Rationale

The vise-supporting platform is large. The vise is fastened by 4 bolts. Reason: for irregular-shaped materials, the vise can be removed and the platform can be used as the work surface. Of course, elevating materials must be placed as to create a blade slot.