Cold Saw/Build Instructions: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
No edit summary
 
(16 intermediate revisions by 2 users not shown)
Line 1: Line 1:
=Source Hardware=
=Source Hardware=


http://opensourceecology.org/wiki/Cold_Saw/Sourcing
http://opensourceecology.org/wiki/Cold_Saw/Sourcing


=Base to Vise Matching=
=Cutting=


http://opensourceecology.org/wiki/Cold_Saw/Build_Instructions/Base_to_Vise
=Accessories=


=Base: Drill Base Flat=
=Base to Vise=


http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Base_Flat
http://opensourceecology.org/wiki/Cold_Saw/Build_Instructions/Base_to_Vise
 
Match drill using Fixed Block


=Base: Drill Base Plate=
=Vise=


http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Baseplate
http://opensourceecology.org/wiki/Cold_Saw/Build_Instructions/Vise


Match drill using Base Flat
=Swivel=


=Vise Assembly=
http://opensourceecology.org/wiki/Cold_Saw/Build_Instructions/Swivel


*'''Clamp Blocks onto Moving Blocks''': Tack weld + weld the Clamp Blocks onto the Moving Blocks, then surface grind the clamping face of the Clamp Blocks such that their clamping faces are parallel. Then drill the Jaw holes through the Clamp Blocks.
=Support=


Match drill the Moving Blocks using the Fixed Block.
http://opensourceecology.org/wiki/Cold_Saw/Build_Instructions/Support


*'''Threaded Rod and Nuts''': Position the Moving Block such that the Threaded Rod can be inserted vertically. Insert the Threaded Rod, then fasten the Nut onto the threaded rod such that the nut contacts the Moving Block. Center the nut approximately then tack weld + weld the nut onto the Moving Block.
=Blade Guard=


=Swivel: Drill Swivel Plate=
http://opensourceecology.org/wiki/Cold_Saw/Build_Instructions/Blade_Guard


=Swivel: Drill Shaft Blocks=
=Drive=


=Support: Drill Support Flat=
http://opensourceecology.org/wiki/Cold_Saw/Build_Instructions/Drive


=Support: Drill Interface Flat=
=Complete Assembly=


=Support: Drill MiniSupport Flat=
http://opensourceecology.org/wiki/Cold_Saw/Build_Instructions/Complete_Assembly


=Blade Guard Parts=
=90 Degree Cut Test=


=Drive Assembly=
Use dial indicator on circumference of blade.

Latest revision as of 23:10, 5 July 2012


Source Hardware

http://opensourceecology.org/wiki/Cold_Saw/Sourcing

Cutting

Accessories

Base to Vise

http://opensourceecology.org/wiki/Cold_Saw/Build_Instructions/Base_to_Vise

Vise

http://opensourceecology.org/wiki/Cold_Saw/Build_Instructions/Vise

Swivel

http://opensourceecology.org/wiki/Cold_Saw/Build_Instructions/Swivel

Support

http://opensourceecology.org/wiki/Cold_Saw/Build_Instructions/Support

Blade Guard

http://opensourceecology.org/wiki/Cold_Saw/Build_Instructions/Blade_Guard

Drive

http://opensourceecology.org/wiki/Cold_Saw/Build_Instructions/Drive

Complete Assembly

http://opensourceecology.org/wiki/Cold_Saw/Build_Instructions/Complete_Assembly

90 Degree Cut Test

Use dial indicator on circumference of blade.

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/Build_Instructions&oldid=68519"