Electronics Workstation: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
 
(14 intermediate revisions by the same user not shown)
Line 1: Line 1:
=ESD (Electro-static discharge) Protection=
=Electronic Protection=


*'''ESD Mat''' [http://www.esdmat.com/detail.php?pid=182625 Source] '''In Testing'''
Electrostatic Discharge Safety


*'''ESD Wriststrap''' [http://www.amazon.com/KingWin-Anti-Static-Wrist-Strap-ATS-W24/dp/B0042TLA90/ref=sr_1_2?ie=UTF8&qid=1339360444&sr=8-2&keywords=static+wrist+strap Source] '''In Testing'''
http://opensourceecology.org/wiki/Electrostatic_Discharge_Safety


*'''ESD Smock''' [Source]
Particulate Safety


*'''Conformal Coating''' [Source]
http://opensourceecology.org/wiki/Particulate_Safety


=Power=
=Soldering=


*'''CSI3005x5: Benchtop Power Supply ''' [http://www.circuitspecialists.com/dc-bench-power-supply-csi3005x5.html Source]
=Soldering=


*'''Hakko FX 888: Soldering Station''' [http://gokimco.com/hakko-fx-888-esd-safe-soldering-station-free-shipping.html?gclid=CKe6huujrLACFWQDQAodwyxKUA Source]


*'''Solder''' [Source]
*'''Solder''' [Source]


*'''Flux''' [Source
*'''Flux''' [Source
=Thermal Transfer=
*'''Wagner HT1000: 1200W Heat Gun''' [http://www.amazon.com/Wagner-Power-Products-503008-200-Watt/dp/B00004TUCV/ref=sr_1_1?ie=UTF8&qid=1339026236&sr=8-1 Source]
=Air Safety=
*'''Carbon Filters''' [http://www.amazon.com/Carbon-Filter-Activated-Xytronic-Absorber/dp/B005C5HUI8/ref=sr_1_3?ie=UTF8&qid=1339023328&sr=8-3 Source]
*'''Fan''' [http://www.amazon.com/Cooler-Master-80mm-Bearing-Black/dp/B0009JZSKO/ref=sr_1_1?s=electronics&ie=UTF8&qid=1339029633&sr=1-1 Source]
*'''12V Power Supply''' [http://www.amazon.com/Wall-Adapter-Power-Supply-12VDC/dp/B006GEPUYA/ref=sr_1_1?s=electronics&rps=1&ie=UTF8&qid=1339030393&sr=1-1 Source]
=Signal Analysis=
*'''Oscilloscope''' [http://www.amazon.com/ATTEN-ADS1102CAL-Digital-Oscilloscope-Model/dp/B007CC8Q50?tag=duckduckgo-d-20 Source]
=Connection and Insulation=
*'''Shrink Tubing''' [http://www.amazon.com/Anytime-SHRINK-TUBING-SLEEVES-ASSORTED/dp/B005W42SW2/ref=sr_1_1?ie=UTF8&qid=1339024381&sr=8-1 Source]
*'''Connectors'''
*'''Fuses''' [http://www.amazon.com/Advanced-Design-Model-ATD-364-Assortment/dp/B000M61JFC/ref=sr_1_6?s=hi&ie=UTF8&qid=1339024968&sr=1-6 Source]
*'''Light Duty Switch''' [http://www.amazon.com/Heavy-Duty-Toggle-Switch-SPST/dp/B0002ZPBRA/ref=sr_1_1?s=hi&ie=UTF8&qid=1339024759&sr=1-1 Source]
*'''Emergency Switch''' [Source]
=Discrete Electrical Components=
*'''Resistors''' [http://www.amazon.com/Joe-Knows-Electronics-Value-Resistor/dp/B003UC4FSS/ref=sr_1_2?ie=UTF8&qid=1339124374&sr=8-2 Source]
*'''Capacitors''' [http://www.amazon.com/Joe-Knows-Electronics-Value-Capacitor/dp/B007SVHFXO/ref=sr_1_2?ie=UTF8&qid=1339124980&sr=8-2 Source]
=Holders=
*'''Helping Hands with Magnifier''' [http://www.amazon.com/Helping-Hands-with-Magnifying-Glass/dp/B000RB38X8/ref=sr_1_1?s=hi&ie=UTF8&qid=1339026362&sr=1-1 Source]


=Wires=
=Wires=
Line 68: Line 26:


=Circuit Board Testing=
=Circuit Board Testing=
=Battery Charging=
*NiMH: Set power supply at 1.2V with current limit depending on the battery's capacity (ex. if 2500mAh, then set current limit at 2.5A). For multiple batteries, connect the batteries in parallel then set the current limit based on the battery set's capacity (ex. if 30,000mAh, then set current limit at 30A). Lower current limits are ok, but they will result in slower charge rates; higher current limits are situationally ok- if excessive current is channeled for too long a time, then the battery will overheat.

Latest revision as of 07:20, 14 July 2012

Electronic Protection

Electrostatic Discharge Safety

http://opensourceecology.org/wiki/Electrostatic_Discharge_Safety

Particulate Safety

http://opensourceecology.org/wiki/Particulate_Safety

Soldering

  • Solder [Source]
  • Flux [Source

Wires

Extension Cords

Circuit Board Testing

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Electronics_Workstation&oldid=69141"