Tooling Plate: Difference between revisions
Jump to navigation
Jump to search
(→Build) |
(→Build) |
||
| Line 30: | Line 30: | ||
Use [[Roughing Endmill]] on [[Mill]] (1/2" dia 4 flute) | Use [[Roughing Endmill]] on [[Mill]] (1/2" dia 4 flute) | ||
---- | ---- | ||
| Line 40: | Line 36: | ||
Match or be a bit less than the depth of the slot; firmly lock the height for this entire step. | Match or be a bit less than the depth of the slot; firmly lock the height for this entire step. | ||
---- | ---- | ||
Drill? Tap? | Drill? Tap? | ||
Revision as of 06:42, 13 November 2012
Introduction
Design
Holes
Mounting interface to machine? Assuming screw-down.
Tools
Roughing Endmill - 1/2" dia - Mcmaster Carr 8817A52
T-slot Cutter - for 1/2" bolts - Mcmaster Carr 8789A12
Materials
Grey Iron - 1" x 6" x 12" - Mcmaster Carr 8923K671
Build
Use Surface Grinder
Surface grind top and bottom faces to be parallel.
Use Roughing Endmill on Mill (1/2" dia 4 flute)
Use T-slot cutter on mill. (31/32" Cutter Dia, 25/64" W Face)
Match or be a bit less than the depth of the slot; firmly lock the height for this entire step.
Drill? Tap?