Shopping List: Difference between revisions
Jump to navigation
Jump to search
| Line 18: | Line 18: | ||
**Requires fabrication of quick coupler mechanism - equivalent of bicycle quick release except much stiffer | **Requires fabrication of quick coupler mechanism - equivalent of bicycle quick release except much stiffer | ||
**MicroTrac will be required for use on many occasions, so wheel motor, though quick release, should be dedicated to MicroTrac. Another motor, used for MicroTrac auger, should be shared. | **MicroTrac will be required for use on many occasions, so wheel motor, though quick release, should be dedicated to MicroTrac. Another motor, used for MicroTrac auger, should be shared. | ||
* | *Control valve, 3 body, SAE 12/16 In/Out, SAE 10 work ports, [https://surpluscenter.com/item.asp?UID=2009041514290385&item=9-7175&catname=hydraulic $200] - 25 gpm, # SAE 12/16 IN/OUT ports, SAE 10 work ports | ||
*3.0 inch cylinder - SAE 8 outlets - [https://surpluscenter.com/item.asp?UID=2009050111530930&item=9-5460&catname=hydraulic $45] | *3.0 inch cylinder - SAE 8 outlets - [https://surpluscenter.com/item.asp?UID=2009050111530930&item=9-5460&catname=hydraulic $45] | ||
*2 bearings - 1 7/8" - [https://surpluscenter.com/item.asp?UID=2009050111530930&item=1-210-30-4&catname=powerTrans $20 ea] | *2 bearings - 1 7/8" - [https://surpluscenter.com/item.asp?UID=2009050111530930&item=1-210-30-4&catname=powerTrans $20 ea] | ||
| Line 32: | Line 32: | ||
***1 - Shared case drain tee - [https://surpluscenter.com/item.asp?UID=2009050120352947&item=9-5605-4-4-4&catname=hydraulic $2.50] | ***1 - Shared case drain tee - [https://surpluscenter.com/item.asp?UID=2009050120352947&item=9-5605-4-4-4&catname=hydraulic $2.50] | ||
***2 - quarter hex nip | ***2 - quarter hex nip | ||
**Valve | |||
***6 - SAE 10 to 1/2 NPTM adapter (as above) - [https://surpluscenter.com/item.asp?UID=2009050113181375&item=9-6401-10-8&catname=hydraulic $1.89 ea] | |||
*Metal | *Metal | ||
**1 7/8" shaft | **1 7/8" shaft | ||
Revision as of 01:51, 3 May 2009
Shopping List for April 27, 2009:
MicroTrac Body
3x8" cylinder, SAE 8 in/out, 16" closed pin-to-pin
File:Halfhose72.jpg
half inch npt hose
- Wheel motor - $250 - use quick coupling for interchangeability of motor, shared between devices
- Requires fabrication of quick coupler mechanism - equivalent of bicycle quick release except much stiffer
- MicroTrac will be required for use on many occasions, so wheel motor, though quick release, should be dedicated to MicroTrac. Another motor, used for MicroTrac auger, should be shared.
- Control valve, 3 body, SAE 12/16 In/Out, SAE 10 work ports, $200 - 25 gpm, # SAE 12/16 IN/OUT ports, SAE 10 work ports
- 3.0 inch cylinder - SAE 8 outlets - $45
- 2 bearings - 1 7/8" - $20 ea
- 2 double split collars - 1 7/8" - $7 ea
- Fittings
- Motor
- Valve
- 6 - SAE 10 to 1/2 NPTM adapter (as above) - $1.89 ea
- Metal
- 1 7/8" shaft
- 1/8x1.5" tubing
- Bolts and other mounting plates
- Quick coupler plate metal
NOTES: Make the case drain outlet on the wheel motor accept the case drain from the implement. To do this, use a tee, and have male ends on all motors, and female ends on all hoses.
CEB Prototype 2
- 5x8x2.5" cylinder -
- 14 inch cylinder
- cam rollers -
- Guide Bearings
- Fittings
Power Cube
- Coupler -
- Pump - [1] - $181, 12 gpm at 3600 psi
- Filter -
- Fittings
- Metal
Pulverizer
Note: can convert Rototiller to pulverizer, and auger (posthole, planting auger, mixer), according to 'lifesize erector set' philosophy. This can be done by exchanging the motor for a faster one, and using a different set of tines.
- Coupler - needs PTO 6-spline to 1-7/8" shaft converter
- Fittings - have PTO motor already; maybe purchase quick connects for it (in/out sae 10, sae 4 case drain)
- Go from SAE 4 to 1/4 male for $1
- Go from SAE 10 to 1/2 NPTM at $2
- Need two coupler pairs at 1/2" - at $16 and one at 1/4" - 1/4" pair at $11
- Metal
HexaHatch
- Motor -
- Coupler -