Shopping List: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
Line 66: Line 66:
[[Image:14inchcylinder.jpg|thumb|14 inch hopper cylinder]]
[[Image:14inchcylinder.jpg|thumb|14 inch hopper cylinder]]
[[Image:hopperaugermotor.jpg|thumb|hopper auger motor, 1.9 cu in]]
[[Image:hopperaugermotor.jpg|thumb|hopper auger motor, 1.9 cu in]]
[[Image:needlevalve.jpg|thumb|0-5 GMP needle valve, 1/4"]]


'''Hydraulics'''
'''Hydraulics'''
Line 72: Line 73:
*14 inch hopper cylinder - [https://surpluscenter.com/item.asp?UID=2009041617095429&item=9-7270-14&catname=hydraulic $119]
*14 inch hopper cylinder - [https://surpluscenter.com/item.asp?UID=2009041617095429&item=9-7270-14&catname=hydraulic $119]
*Auger motor, 1.9 cu in - [https://surpluscenter.com/item.asp?UID=2009041617095429&item=9-1157&catname=hydraulic $239]
*Auger motor, 1.9 cu in - [https://surpluscenter.com/item.asp?UID=2009041617095429&item=9-1157&catname=hydraulic $239]
*Fittings
 
*Fittings and hose
 
**Main Cylinder
**Main Cylinder
***2 - 1/2" NPT elbows (same as above) - $2.75 ea.
***2 - 1/2" NPT elbows (same as above) - $2.75 ea.
***2 - quick couplers (same as above) - $16 ea.
***2 - quick couplers (same as above) - $16 ea.
***2 - 1/2"x96" hose - [https://surpluscenter.com/item.asp?UID=2009050412033450&item=905-1296&catname=hydraulic $17 ea.]
**14" cylinder
**14" cylinder
***2 - SAE 6M to 1/2 NPT straight swivel - [https://surpluscenter.com/item.asp?UID=2009050317415471&item=9-6900-6-8&catname=hydraulic $4 ea.]
***2 - SAE 6M to 1/2 NPT straight swivel - [https://surpluscenter.com/item.asp?UID=2009050317415471&item=9-6900-6-8&catname=hydraulic $4 ea.]
***2 - quick couplers (same as above) - $16 ea.
***2 - quick couplers (same as above) - $16 ea.
***2 - 1/2"x96" hose - [https://surpluscenter.com/item.asp?UID=2009050412033450&item=905-1296&catname=hydraulic $17 ea.]
***1 - needle valve - [https://surpluscenter.com/item.asp?UID=2009050412033450&item=9-5302-25&catname=hydraulic $26]
**Auger motor
**Auger motor
***
***2 - 3/8" quick couplers - [https://surpluscenter.com/item.asp?UID=2009050412033450&item=9-7381&catname=hydraulic $8]
 
***2 - 3/8" nip - [https://surpluscenter.com/item.asp?UID=2009050412033450&item=9-5404-6-6&catname=hydraulic $1]
***2 - 3/8x96" hoses - [https://surpluscenter.com/item.asp?UID=2009050412033450&item=903-3896&catname=hydraulic $16]
***1 - 1/2" quick coupler - same as above, $16
***2 - 1/2" nip - same as above, $1.35 ea.


'''Guides'''
'''Guides'''

Revision as of 18:06, 4 May 2009

Shopping List for April 27, 2009:

MicroTrac Body

Hose lengths from valve to wheel motor are 6 feet.
32 cu in wheel motor, 5130 in oz torque, 145 rpm at 20 gpm
3 spool, OC, 25 gpm valve
3x8" cylinder, SAE 8 in/out, 16" closed pin-to-pin
1 7/8" bearing
1 7/8" double split lock collar
SAE 10 to 1/2" NPT
half inch npt quick coupler pair
quarter inch npt quick coupler pair
File:Halfhose72.jpg
half inch npt hose
quarter inch hose
Valve in/out couplers
  • Wheel motor - $250 - use quick coupling for interchangeability of motor, shared between devices
    • Requires fabrication of quick coupler mechanism - equivalent of bicycle quick release except much stiffer
    • MicroTrac will be required for use on many occasions, so wheel motor, though quick release, should be dedicated to MicroTrac. Another motor, used for MicroTrac auger, should be shared.
  • Control valve, 3 body, SAE 12/16 In/Out, SAE 10 work ports, $200 - 25 gpm, # SAE 12/16 IN/OUT ports, SAE 10 work ports
  • 3.0 inch cylinder - SAE 8 outlets - $45
  • 2 bearings - 1 7/8" - $20 ea
  • 2 double split collars - 1 7/8" - $7 ea
  • Fittings and hose. Use quick couplers on motors and cylinders
    • Motor - has in/out plus a case drain
      • 2 - SAE 10 to 1/2 NPTM straight - $1.89 ea
      • 1 - SAE 4 to 1/4 NTPM - $0.95
      • 2 - 1/2 NPT quick coupler pair - $16 ea
      • 1 - 1/4 NPT quick coupler pair - $12
      • 2 - 1/2x72" hose, 3000 PSI - $17 ea
      • 1 - 1/4x72" hose, case drain - $11
      • 1 - Shared case drain tee - $2.50
      • 2 - quarter hex nip
    • Valve - has in/out plus 3 identical work port pairs
      • 6 - SAE 10 to 1/2 NPTM straight (as above) - $1.89 ea
      • 6 for work ports and 2 for in/outlet - 1/2 NPT(F) quick coupler pair - (note that quick couplers fit just about exactly in allowed space of 1.5" between adjacent ports) - $16 ea
      • 1 - SAE 12 inlet to 1/2 NPTF straight swivel - $3.79
      • 2 (one for inlet, one for outlet) - 1/2" NPTM elbow - $2.75
      • 1 - SAE 16 outlet to 3/4" NPTF straight - $5.25
      • 1 - 3/4 to 1/2 bushing - $1.60
    • 2 - 1/2x48" hose with NPTM ends - $10.75 ea.
  • Cylinder
    • 2 - SAE 8 fittings (got spares) - $2.19 ea
    • 2 - 1/2" NPTM elbow (same as above) - $2.75
    • 1 - 1/2x84" hose 3000 PSI - $15.50
    • 1 - 1/2x96" hose 3000 PSI - $17
    • 2 - 1/2" quick coupler pairs (same as above) - $16 ea.
  • Metal
    • 1 7/8" shaft
    • 1/8x1.5" tubing
    • Bolts and other mounting plates
    • Quick coupler plate metal

NOTES: Make the case drain outlet on the wheel motor accept the case drain from the implement. To do this, use a tee.

CEB Prototype 2

5" Welded Clevis type, Dalton source
5" Welded Tee type, Dalton source
14 inch hopper cylinder
hopper auger motor, 1.9 cu in
0-5 GMP needle valve, 1/4"

Hydraulics

  • 5x8x2.5", 1/2" NPT ports, Dalton Hydraulic source, welded tee - $361
  • 14 inch hopper cylinder - $119
  • Auger motor, 1.9 cu in - $239
  • Fittings and hose
    • Main Cylinder
      • 2 - 1/2" NPT elbows (same as above) - $2.75 ea.
      • 2 - quick couplers (same as above) - $16 ea.
      • 2 - 1/2"x96" hose - $17 ea.
    • 14" cylinder
      • 2 - SAE 6M to 1/2 NPT straight swivel - $4 ea.
      • 2 - quick couplers (same as above) - $16 ea.
      • 2 - 1/2"x96" hose - $17 ea.
      • 1 - needle valve - $26
    • Auger motor
      • 2 - 3/8" quick couplers - $8
      • 2 - 3/8" nip - $1
      • 2 - 3/8x96" hoses - $16
      • 1 - 1/2" quick coupler - same as above, $16
      • 2 - 1/2" nip - same as above, $1.35 ea.

Guides

  • Cam rollers -
  • Guide Bearings -

Power Cube

  • Coupler -
  • Pump - [1] - $181, 12 gpm at 3600 psi
  • Filter -
  • Suction strainer -
  • Fittings -
  • Hose - suction from tank to pump - got it already; from pump to valve included already
  • Metal

Pulverizer

Note: can convert Rototiller to pulverizer, and auger (posthole, planting auger, mixer), according to 'lifesize erector set' philosophy. This can be done by exchanging the motor for a faster one, and using a different set of tines.

HexaHatch

  • Motor -
  • Coupler -