Torch Table Zaxis: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
No edit summary
 
(3 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{Category=Torch Table}}
=Bill of Materials=
=Bill of Materials=
Item Discription Amount Cost per item Further Info Purpose Aquired?
{|border="1" {{table}}
Bearing R6-2RS 3/8"x7/8"x9/32" Sealed 10 pack 0 $14.95 VXB Part Number: Kit711 For preventing the carrage from jumping the track no
| align="center" style="background:#f0f0f0;"|'''Item'''
V-Groove Bearings 3/8 inch single pack 4 9.95 VXB V-Groove bearings Part number: Kit8407 To provide low friction linear motion no
| align="center" style="background:#f0f0f0;"|'''Discription'''
3/8 inch Hard Fiber Washers Pack of 100 8 2.5 McMaster Part Number: 95601A330 Holding bearings no
| align="center" style="background:#f0f0f0;"|'''Amount'''
Hot rolled steel 3"x1/8" plate 10.0 Ft. 1.083333333 12.7 Metalsdepot To provide material for motor mounts no
| align="center" style="background:#f0f0f0;"|'''Cost per item'''
Hot rolled steel 1"x1" square tubes 16 gauge 24ft for $23.28 16 23.28 Metalsdepot To provide structural support no
| align="center" style="background:#f0f0f0;"|'''Further Info'''
Gear Rack  (1/2” sq. x 72” 20 DP 20 Deg) 6 feet per rack 1.333333333 24.8 Standard Steel Specialty Part Number: 200011 rack for gear to ride on no
| align="center" style="background:#f0f0f0;"|'''Purpose'''
3 x 1/8 inch cold rolled Plate 6.0 Ft. 1.333333333 17.28 Metalsdepot To provide material to make rails no
| align="center" style="background:#f0f0f0;"|'''Aquired?'''
"3/8 inch threaded rod, Overall Length
|----
36"""  Each 22.8 $2 McMaster Part Number:  98837A031 for connecting the top and bottom carage no
|V-Groove Bearings 3/8 inch
3/8 inch nuts Pack of 100 16 4.2 Part Number: 90473A031 For locking threaded rod in place no
|single pack
3/8 inch washers Pack of 140 16 3.23 Part Number: 90126A031 For locking nuts and for spacers no
|4
Steel 20 Deg Pressure Angle Spur Gear 20 Pitch, 20 Teeth, 1" Pitch Dia, 1/2" Bore Each 1 15.37 McMaster Part Number: 5172T12 Attaches to stepper motors and interfaces with gear rack no
|9.95
sleeve bearing Each 1 1.34 McMaster Part Number: 6391K143 to connect between the stepper motor and the gear, will also add a bit of adjustable length no
|VXB V-Groove bearings Part number: Kit8407
10-32 set screw 7/16" per Pack of 100 1 5.44 Part Number: 92311A428 Set screw for attaching spur gear, sleeve bearing to stepper shaft no
|To provide low friction linear motion
10 gauge bolts Pack of 50 6 7.78 McMaster Part Number: 92610A245 stepper no
|no
10 gauge nuts Pack of 100 6 1.54 McMaster Part Number: 90480A011 stepper no
|----
Zinc-Pltd Stl Pan Head Phillips Machine Screw 1/4"-20 Thread, 1-1/2" Length Pack of 100 4 10.75 McMaster Part Number:  90272A546 Connects the mount plate arms to the carrage no
|3/8 inch Hard Fiber Washers
Zinc & Yellow Plated Grade 8 Steel Hex Nut 1/4"-20 Thread Size, 7/16" Width, 7/32" Height Packs of 100 16 3.06 McMaster Part Number: 94895A029 For locking the mount plate swing tightness no
|Pack of 100
1/4 inch Nylon Thrust Bearing Each 4 1.05 McMaster Part Number: 2797T1 allows the motor to swing freely no
|8
stepper spring pack of 6 1 10 McMaster Part Number: 3114T79 Prevents stepper motor shaft from crunching no
|2.5
|McMaster Part Number: 95601A330
|Holding bearings
|no
|----
|Hot rolled steel 3"x1/8" plate
|10.0 Ft.
|1.08 ft
|12.7
|Metalsdepot
|To provide material for motor mounts
|no
|----
|Hot rolled steel 1"x1" square tubes 16 gauge
|24ft for $23.28
|1.33 ft
|23.28
|Metalsdepot
|To provide structural support
|no
|----
|Gear Rack  (1/2” sq. x 72” 20 DP 20 Deg)
|6 feet per rack
|1.33 ft
|24.8
|Standard Steel Specialty Part Number: 200011
|rack for gear to ride on
|no
|----
|3 x 1/8 inch cold rolled Plate
|6.0 Ft.
|1.33 ft
|17.28
|Metalsdepot
|To provide material to make rails
|no
|----
|3/8 inch threaded rod, Overall Length 36"
| Each
|1.90 ft
|$2  
|McMaster Part Number:  98837A031
|for connecting the top and bottom carage
|no
|----
|3/8 inch nuts
|Pack of 100
|16
|4.2
|Part Number: 90473A031
|For locking threaded rod in place
|no
|----
|3/8 inch washers
|Pack of 140
|16
|3.23
|Part Number: 90126A031
|For locking nuts and for spacers
|no
|----
|Steel 20 Deg Pressure Angle Spur Gear 20 Pitch, 20 Teeth, 1" Pitch Dia, 1/2" Bore
|Each
|1
|15.37
|McMaster Part Number: 5172T12
|Attaches to stepper motors and interfaces with gear rack
|no
|----
|sleeve bearing
|Each
|1
|1.34
|McMaster Part Number: 6391K143
|to connect between the stepper motor and the gear, will also add a bit of adjustable length
|no
|----
|10-32 set screw 7/16"
|per Pack of 100
|1
|5.44
|Part Number: 92311A428
|Set screw for attaching spur gear, sleeve bearing to stepper shaft
|no
|----
|Zinc-Pltd Stl Pan Head Phillips Machine Screw 10-32 Thread, 1-3/4" Length
| Pack of 100
|2
|8.45
|McMaster Part Number: 90272A837
|Connects the mount plate arms to the carrage
|no
|----
|Zinc-Pltd Stl Pan Head Phillips Machine Screw 10-32 Thread, 2-1/2" Length
|Pack of 100
|2
|6.58
|McMaster Part Number: 90272A840
|For connecting the rail, rack, spacer and c channel
|no
|----
|Zinc-Pltd Stl Pan Head Phillips Machine Screw 10-32 Thread, 3/4" Length
|Pack of 100
|6
|5.11
|McMaster Part Number: 90272A831
|Connects the mount plate arms to the carrage
|no
|----
|Zinc-Plated Steel Machine Screw Hex Nut 10-32 Thread Size, 3/8" Width, 1/8" Height
|Packs of 100
|10
|1.55
|McMaster Part Number: 90480A195
|For locking the mount plate swing tightness, tightening the rack and locking the stepper motor in place
|no
|----
|Nylon 6/6 General Purpose Flat Washer Off-White, No. 10 Screw Sz, .44" OD,.02"-.04" Thk
|per Pack of 100
|8
|3.83
|Part Number: 90295A120
|allows the motor to swing freely
|no
|----
|stepper spring
|pack of 6
|1
|10
|McMaster Part Number: 3114T79
|Prevents stepper motor shaft from crunching  
|no
|----
|}

Latest revision as of 18:39, 9 February 2011

Main > Digital Fabrication > RepLab Tools > Torch Table

Bill of Materials

| align="center" style="background:#f0f0f0;"|Item | align="center" style="background:#f0f0f0;"|Discription | align="center" style="background:#f0f0f0;"|Amount | align="center" style="background:#f0f0f0;"|Cost per item | align="center" style="background:#f0f0f0;"|Further Info | align="center" style="background:#f0f0f0;"|Purpose | align="center" style="background:#f0f0f0;"|Aquired? |---- |V-Groove Bearings 3/8 inch |single pack |4 |9.95 |VXB V-Groove bearings Part number: Kit8407 |To provide low friction linear motion |no |---- |3/8 inch Hard Fiber Washers |Pack of 100 |8 |2.5 |McMaster Part Number: 95601A330 |Holding bearings |no |---- |Hot rolled steel 3"x1/8" plate |10.0 Ft. |1.08 ft |12.7 |Metalsdepot |To provide material for motor mounts |no |---- |Hot rolled steel 1"x1" square tubes 16 gauge |24ft for $23.28 |1.33 ft |23.28 |Metalsdepot |To provide structural support |no |---- |Gear Rack (1/2” sq. x 72” 20 DP 20 Deg) |6 feet per rack |1.33 ft |24.8 |Standard Steel Specialty Part Number: 200011 |rack for gear to ride on |no |---- |3 x 1/8 inch cold rolled Plate |6.0 Ft. |1.33 ft |17.28 |Metalsdepot |To provide material to make rails |no |---- |3/8 inch threaded rod, Overall Length 36" | Each |1.90 ft |$2 |McMaster Part Number: 98837A031 |for connecting the top and bottom carage |no |---- |3/8 inch nuts |Pack of 100 |16 |4.2 |Part Number: 90473A031 |For locking threaded rod in place |no |---- |3/8 inch washers |Pack of 140 |16 |3.23 |Part Number: 90126A031 |For locking nuts and for spacers |no |---- |Steel 20 Deg Pressure Angle Spur Gear 20 Pitch, 20 Teeth, 1" Pitch Dia, 1/2" Bore |Each |1 |15.37 |McMaster Part Number: 5172T12 |Attaches to stepper motors and interfaces with gear rack |no |---- |sleeve bearing |Each |1 |1.34 |McMaster Part Number: 6391K143 |to connect between the stepper motor and the gear, will also add a bit of adjustable length |no |---- |10-32 set screw 7/16" |per Pack of 100 |1 |5.44 |Part Number: 92311A428 |Set screw for attaching spur gear, sleeve bearing to stepper shaft |no |---- |Zinc-Pltd Stl Pan Head Phillips Machine Screw 10-32 Thread, 1-3/4" Length | Pack of 100 |2 |8.45 |McMaster Part Number: 90272A837 |Connects the mount plate arms to the carrage |no |---- |Zinc-Pltd Stl Pan Head Phillips Machine Screw 10-32 Thread, 2-1/2" Length |Pack of 100 |2 |6.58 |McMaster Part Number: 90272A840 |For connecting the rail, rack, spacer and c channel |no |---- |Zinc-Pltd Stl Pan Head Phillips Machine Screw 10-32 Thread, 3/4" Length |Pack of 100 |6 |5.11 |McMaster Part Number: 90272A831 |Connects the mount plate arms to the carrage |no |---- |Zinc-Plated Steel Machine Screw Hex Nut 10-32 Thread Size, 3/8" Width, 1/8" Height |Packs of 100 |10 |1.55 |McMaster Part Number: 90480A195 |For locking the mount plate swing tightness, tightening the rack and locking the stepper motor in place |no |---- |Nylon 6/6 General Purpose Flat Washer Off-White, No. 10 Screw Sz, .44" OD,.02"-.04" Thk |per Pack of 100 |8 |3.83 |Part Number: 90295A120 |allows the motor to swing freely |no |---- |stepper spring |pack of 6 |1 |10 |McMaster Part Number: 3114T79 |Prevents stepper motor shaft from crunching |no |---- |}

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Torch_Table_Zaxis&oldid=18042"