Latest revision as of 04:45, 23 December 2011

Tools

Weld the pieces together on both sides (upper and lower), ensuring everything is square.

@@ Line 1: / Line 1: @@
-{{Category=CEB press building instructions}}
+[[Image:hopper-mounting-plate.jpg|thumb]]
-[[Category:CEB press building instructions]]
+<html><iframe src="http://sketchup.google.com/3dwarehouse/mini?mid=1951330c482561411211da1f85706ccd&etyp=sw&width=400&height=300" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" width="400" height="300"></iframe>
+</html>
+=Tools=
-[[Image:hopper-mounting-plate.jpg|thumb]]
+*Hole punch with 13/16" Die
+*Welder
+*Angle Grinder
+=Materials=
+*[2] Steel Plate 1/2” x 3” x 11.25”
-== Tools Required ==
+*[2] Steel Plate 1/2” x 3” x 15”
+=Fabrication Steps=
+*Punch the 13/16" holes in the 15" pieces.
-== Materials Required ==
+[[Image:hoppermountholes.jpg|400px|The hole locations]]
-*1/2”x2”x10” (2)
-*1/2”x2”x14” (2)
-== Diagrams ==
+*Weld the pieces together on both sides (upper and lower), ensuring everything is square.
+[[Image:hoppermountweld.jpg|400px|How to prep the plate for welding]]
-== Fabrication Steps ==
+*Grind one side (upper or lower) smooth to facilitate installation