Industrial Robot Bill of Materials: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Added note for major changes and master diagram both to come)
 
(21 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{ToolTemplate|ToolName=Industrial Robot}}
#REDIRECT [[Industrial Robot/Bill of Materials]]
 
----
 
*Note: Major Changes to be applied along with master diagram.
 
*This bill of materials is a developmental version.
 
{| cellpadding="6" cellspacing="0" border="1" align="left"
! PART NAME
! NUMBER NEEDED
! PURPOSE
! COST
! SUGGESTED SOURCE
 
|-align="left"
! Foundation Underplate
! 1
! Ground contact mount for industrial robot (15" by 15" by 0.25" A36 steel plate)
! est. under 130
!
 
|-align="left"
! Foundation Underplate Bolt
! 4
! Fastener piece for foundation underplate to support (stainless steel 18-8, 1/2”-13 diameter and threads per inch, 3" length, hex bolt)
! est. under 6
!
 
|-align="left"
! Foundation Underplate Washer
! 4
! Fastener piece for foundation underplate to support (stainless steel 18-8, 1/2” inner diameter washer)
! est. under 1
!
 
|-align="left"
! Foundation Underplate Nut
! 4
! Fastener piece for foundation underplate to support (stainless steel 18-8, 1/2”-13 diameter and threads per inch, hex nut)
! est under 2
!
 
|-align="left"
! MIG Welding Consumables
! Enough for welding the 4 pillars onto the foundation underplate and 2 hubs onto the tube
! Materials for welding the foundation pillars onto the foundation underplate
! guess under 10
!
 
|-align="left"
! Foundation Pillar
! 4
! Supporting frame between foundation plates(2” by 2” by 10”, A36 steel square bar)
! est under 100
!
 
|-align="left"
! Foundation Angle
! 4
! Connector piece between foundation pillars and foundation overplate (4” width A by 2” width B by 2” length,  A36 steel angle, 0.5” thickness)
! est under 6
!
 
|-align="left"
! Foundation Angle Bolt
! 12
! Fastener piece between foundation pillars and foundation overplate (stainless steel 18-8, 1/2”-13 diameter and threads per inch, 3” length, hex bolt)
! est under 5
!
 
|-align="left"
! Foundation Angle Washer
! 12
! Fastener piece between foundation pillars and foundation overplate (stainless steel 18-8, 1/2” inner diameter washer)
! est under 1
!
 
|-align="left"
! Foundation Angle Nut
! 12
! Fastener piece between foundation pillars and foundation overplate (stainless steel 18-8, 1/2”-13 diameter and threads per inch, hex nut)
! est under 2
!
 
|-align="left"
! Foundation Overplate
! 1
! Mid-air mount for industrial robot (11” by 11” by 0.25” A36 steel plate)
! est under 90
!
 
|-align="left"
! Joint 1 Gearbox
! 1
! Enables rotation of baseplate relative to foundation overplate and insertion of motor shaft for rotation control
! guess under 100
!
 
|-align="left"
! Joint 1 Gearbox Bolt
! 10?
! Fastener piece (stainless steel 18-8, x-y diameter and threads per inch, z length, hex bolt)
! guess under 15
!
 
|-align="left"
! Joint 1 Gearbox Washer
! 10?
! Fastener piece (stainless steel 18-8, x inner diameter washer)
! guess under 2
!
 
|-align="left"
! Joint 1 Gearbox Nut
! 10?
! Fastener piece (stainless steel 18-8, x-y diameter and threads per inch, hex nut)
! guess under 4
!
 
|-align="left"
! Joint 1 Hydraulic Motor
! 1
! Rotates base of industrial robot
!est under 150
! surpluscenter
 
|-align="left"
! Joint 1 Motor Bolt
! 4?
! Fastener Piece (stainless steel 18-8, x-y diameter and threads per inch, z length, hex bolt)
! guess under 6
!
 
|-align="left"
! Joint 1 Motor Washer
! 4?
! Fastener Piece (stainless steel 18-8, x inner diameter washer)
! guess under 1
!
 
|-align="left"
! Joint 1 Motor Nut
! 4?
! Fastener Piece (stainless steel 18-8, x-y diameter and threads per inch, hex nut)
! guess under 1
!
 
|-align="left"
! Base Angle
! 1
! Base for industrial robot on top of foundation overplate (8” width A by 8” width B by 8” length A36 steel angle, 1” thickness)
! est under 90
!
 
|-align="left"
! Joint 2 Hydraulic Motor
! 1
! Tilts main arm of industrial robot from base
! es under 150
! surpluscenter
 
|-align="left"
! Joint 2 Hydraulic Motor Bolt
! 4?
! Fastener Piece (stainless steel 18-8, x-y diameter and threads per inch, z length, hex bolt)
! guess under 6
!
 
|-align="left"
! Joint 2 Hydraulic Motor Washer
! 4?
! Fastener Piece (stainless steel 18-8, x inner diameter washer)
! guess under 1
!
 
|-align="left"
! Joint 2 Hydraulic Motor Nut
! 4?
! Fastener Piece (stainless steel 18-8, x-y diameter and threads per inch, hex nut)
! guess under 1
!
 
|-align="left"
! Joint 2 Gearbox
! 1
! Enables tilting of main arm relative to baseplate and control through shaft
! guess under 100
!
 
|-align="left"
! Joint 2 Gearbox Bolt
! 10?
! Fastener Piece (stainless steel 18-8, x-y diameter and threads per inch, z length, hex bolt)
! guess under 15
!
 
|-align="left"
! Joint 2 Gearbox Washer
! 10?
! Fastener Piece (stainless steel 18-8, x inner diameter washer)
! guess under 2
!
 
|-align="left"
! Joint 2 Gearbox Nut
! 10?
! Fastener Piece (stainless steel 18-8, x-y diameter and threads per inch, hex nut)
! guess under 4
!
 
|-align="left"
! Main Arm
! 1
! Frame piece from baseplate to elbow (24“ by 6” by 2” A36 steel bar)
! est under 150
!
 
|-align="left"
! Joint 3 Gearbox
! 1
! Enables tilting of forearm relative to main arm, and control through shaft
! guess under 100
!
 
|-align="left"
! Joint 3 Gearbox Bolt
! 10?
! Fastener Piece (stainless steel 18-8, x-y diameter and threads per inch, z length, hex bolt)
! guess under 15
!
 
|-align="left"
! Joint 3 Gearbox Washer
! 10?
! Fastener Piece (stainless steel 18-8, x inner diameter washer)
! guess under 2
!
 
|-align="left"
! Joint 3 Gearbox Nut
! 10?
! Fastener Piece (stainless steel 18-8, x-y diameter and threads per inch, hex nut)
! guess under 4
!
 
|-align="left"
! Joint 3 Hydraulic Motor
! 1
! Tilts forearm of industrial robot from main arm
! est under 150
! surpluscenter
 
|-align="left"
! Joint 3 Hydraulic Motor Bolt
! 4?
! Fastener Piece (stainless steel 18-8, x-y diameter and threads per inch, z length, hex bolt)
! guess under 6
!
 
|-align="left"
! Joint 3 Hydraulic Motor Washer
! 4?
! Fastener Piece (stainless steel 18-8, x inner diameter washer)
! guess under 1
!
 
|-align="left"
! Joint 3 Hydraulic Motor Nut
! 4?
! Fastener Piece (stainless steel 18-8, x-y diameter and threads per inch, hex nut)
! guess under 1
!
 
|-align="left"
! Joint 4 Hydraulic Motor
! 1
! Rotates wrist of industrial robot from forearm
! est under 150
! surpluscenter
 
|-align="left"
! Joint 4 Hydraulic Motor Bolt
! 4?
! Fastener Piece (stainless steel 18-8, x-y diameter and threads per inch, z length, hex bolt)
! guess under 6
!
 
|-align="left"
! Joint 4 Hydraulic Motor Washer
! 4?
! Fastener Piece (stainless steel 18-8, x inner diameter washer)
! guess under 1
!
 
|-align="left"
! Joint 4 Hydraulic Motor Nut
! 4?
! Fastener Piece (stainless steel 18-8, x-y diameter and threads per inch, hex nut)
! guess under 1
!
 
|-align="left"
! Joint 4 Gearbox
! 1
! Enables rotation of wrist relative to forearm and control through shaft
! guess under 100
!
 
|-align="left"
! Joint 4 Gearbox Bolt
! 10?
! Fastener Piece (stainless steel 18-8, x-y diameter and threads per inch, z length, hex bolt)
! guess under 15
!
 
|-align="left"
! Joint 4 Gearbox Washer
! 10?
! Fastener Piece (stainless steel 18-8, x inner diameter washer)
! guess under 1
!
 
|-align="left"
! Joint 4 Gearbox Nut
! 10?
! Fastener Piece (stainless steel 18-8, x-y diameter and threads per inch, hex nut)
! guess under 2
!
 
|-align="left"
! Forearm Angle
! 1
! For mounting of joint 4 hydraulic motor (8” width A by 8” width B by 12” length steel L-piece, 1” thickness)
! est under 150
!
 
|-align="left"
! Forearm Angle Bolt
! 4
! Fastener Piece (stainless steel 18-8, 1/2”-13 diameter and threads per inch, z length, hex bolt)
! est under 6
!
 
|-align="left"
! Forearm Angle Washer
! 4
! Fastener Piece (stainless steel 18-8, 1/2” inner diameter washer)
! est under 1
!
 
|-align="left"
! Forearm Angle Nut
! 4
! Fastener Piece (stainless steel 18-8, 1/2”-13 diameter and threads per inch, hex nut)
! est under 2
!
 
|-align="left"
! Forearm Hub 1
! 1
! Square plate at one end of forearm (8” by 8” by 0.5” A36 steel plate)
! guess under 50
!
 
|-align="left"
! Forearm
! 1
! Tube connecting elbow to wrist (18” length by 6” diameter by 0.5” thickness A36 steel tube)
! guess under 150
!
 
|-align="left"
! Forearm Hub 2
! 1
! Square plate at one end of forearm (8” by 8” by 0.5” A36 steel plate)
! guess under 50
!
 
|-align="left"
! Wrist Angle
! 1
! For mounting of joint 5 hydraulic motor (8” width A by 8” width B by 8” length steel angle, 1” thickness)
! est under 90
!
 
|-align="left"
! Wrist Angle Bolt
! 4
! Fastener Piece (1/2”-13, 3”, 18-8 Stainless Steel hex bolt)
! est under 5
!
 
|-align="left"
! Wrist Angle Nut
! 4
! Fastener Piece (1/2”-13, 18-8 Stainless Steel hex nut)
! est under 1
!
 
|-align="left"
! Wrist Angle Washer
! 4
! Fastener Piece (1/2”, 18-8 Stainless Steel washer)
! est under 1
!
 
|-align="left"
! Joint 5 Hydraulic Motor
! 1
! Tilts wrist of industrial robot
! est under 150
! surpluscenter
 
|-align="left"
! Joint 5 Hydraulic Motor Bolt
! 4?
! Fastener piece (stainless steel 18-8, x-y diameter and threads per inch, z length, hex bolt)
! guess under 6
!
 
|-align="left"
! Joint 5 Hydraulic Motor Washer
! 4?
! Fastener piece (stainless steel 18-8, x inner diameter washer)
! guess under 1
!
 
|-align="left"
! Joint 5 Hydraulic Motor Nut
! 4?
! Fastener Piece (stainless steel 18-8, x-y diameter and threads per inch, hex nut)
! guess under 1
!
 
|-align="left"
! Joint 5 Gearbox
! 1
! Enables tilting of wrist relative to forearm and control through shaft
! guess under 100
!
 
|-align="left"
! Joint 5 Gearbox Bolt
! 10?
! Fastener Piece (stainless steel 18-8, x-y diameter and threads per inch, z length, hex bolt)
! guess under 15
!
 
|-align="left"
! Joint 5 Gearbox Washer
! 10?
! Fastener Piece (stainless steel 18-8, x inner diameter washer)
! guess under 2
!
 
|-align="left"
! Joint 5 Gearbox Nut
! 10?
! Fastener Piece (stainless steel 18-8, x-y diameter and threads per inch, hex nut)
! guess under 2
!
 
|-align="left"
! Joint 6 Angle
! 1
! For mounting of joint 6 hydraulic motor (8”A by 8”B by 8”Length L-piece, 0.5” thickness)
! est under 90
!
 
|-align="left"
! Joint 6 Angle Bolt
! 4
! Fastener Piece (stainless steel 18-8, 1/2”-13” diameter and threads per inch, z length, hex bolt)
! est under 6
!
 
|-align="left"
! Joint 6 Angle Washer
! 4
! Fastener Piece (stainless steel 18-8, 1/2” inner diameter washer)
! est under 2
!
 
|-align="left"
! Joint 6 Angle Nut
! 4
! Fastener Piece (stainless steel 18-8, 1/2”-13 diameter and threads per inch, hex nut)
! est under 2
!
 
|-align="left"
! Joint 6 Hydraulic Motor
! 1
! Rotates end-effector of industrial robot
! est under 150
! surpluscenter
 
|-align="left"
! Joint 6 Hydraulic Motor Bolt
! 4?
! Fastener Piece (stainless steel 18-8, x-y diameter and threads per inch, z length, hex bolt)
! guess under 6
!
 
|-align="left"
! Joint 6 Hydraulic Motor Washer
! 4?
! Fastener Piece (stainless steel 18-8, x inner diameter washer)
! guess under 2
!
 
|-align="left"
! Joint 6 Hydraulic Motor Nut
! 4?
! Fastener Piece (stainless steel 18-8, x-y diameter and threads per inch, hex nut)
! guess under 2
!
 
|-align="left"
! Joint 6 Gearbox
! 1
! Enables rotation of end effector relative to wrist and control through shaft
! guess under 100
!
 
|-align="left"
! Joint 6 Gearbox Bolt
! 10?
! Fastener Piece (stainless steel 18-8, x-y diameter and threads per inch, z length, hex bolt)
! guess under 15
!
 
|-align="left"
! Joint 6 Gearbox Washer
! 10?
! Fastener Piece (stainless steel 18-8, x inner diameter washer)
! guess under 2
!
 
|-align="left"
! Joint 6 Gearbox nut
! 10?
! Fastener Piece (stainless steel 18-8, x-y diameter and threads per inch, hex nut)
! guess under 2
!
 
|-align="left"
! Powercube
! 1?
! As prime mover-connected pump and reservoir for hydraulic system
! P
!
 
|-align="left"
! Primary 4-way Pipe
! 1
! For tubing connection to: Pump, Secondary 4-way Pipe, Tertiary 4-way Pipe, Pressure Relief Valve
! guess under 20
!
 
|-align="left"
! Pump to Primary 4-way Pipe Hose     
! 1
! Hydraulic connector (x max pressure, y length, z dia)
! guess under 20
!
 
|-align="left"
! Pressure Relief Valve
! 1
! For maintaining continuity of flow when flow to all hydraulic motors is cut
! est under 50
! surpluscentre
 
|-align="left"
! Primary 4-way Pipe to Pressure Relief Valve Hose     
! 1
! Hydraulic connector (x max pressure, y length, z dia)
! guess under 20
!
 
|-align="left"
! Pressure Relief Valve to Tank Hose     
! 1
! Hydraulic connector (x max pressure, y length, z dia)
! guess under 20
!
 
|-align="left"
! Secondary 4-way Pipe
! 1
! For tubing connection to: Primary 4-way Pipe, Joint 1 Needle Valve, Joint 2 Needle Valve, Joint 3 Needle Valve
! guess under 20
!
 
|-align="left"
! Primary 4-way Pipe to Secondary 4-way Pipe Hose     
! 1
! Hydraulic connector (x pressure, y length, z dia)
! guess under 20
!
 
|-align="left"
! Tertiary 4-way Pipe
! 1
! For tubing connection to: Primary 4-way Pipe, Joint 4 Needle Valve, Joint 5 Needle Valve, Joint 6 Needle Valve
! guess under 20
!
 
|-align="left"
! Primary 4-way Pipe to Tertiary 4-way Pipe Hose     
! 1
! Hydraulic connector (x pressure, y length, z dia)
! guess under 20
!
 
|-align="left"
! Joint 1 Needle Valve
! 1
! Flow control for joint 1 hydraulic motor
! est under 43
!
 
|-align="left"
! Joint 2 Needle Valve
! 1
! Flow control for joint 2 hydraulic motor
! est under 43
!
 
|-align="left"
! Joint 3 Needle Valve
! 1
! Flow control for joint 3 hydraulic motor
! est under 43
!
 
|-align="left"
! Secondary 4-way pipe to Joint 1 Needle Valve Hose     
! 1
! Hydraulic Connector
! guess under 20
!
 
|-align="left"
! Secondary 4-way pipe to Joint 2 Needle Valve Hose     
! 1
! Hydraulic Connector
! guess under 20
!
 
|-align="left"
! Secondary 4-way pipe to Joint 3 Needle Valve Hose     
! 1
! Hydraulic Connector
! guess under 20
!
 
|-align="left"
! Joint 4 Needle Valve
! 1
! Flow control for joint 4 hydraulic motor
! est under 43
! surpluscentre
 
|-align="left"
! Joint 5 Needle Valve
! 1
! Flow control for joint 5 hydraulic motor
! est under 43
! surpluscentre
 
|-align="left"
! Joint 6 Needle Valve
! 1
! Flow control for joint 6 hydraulic motor
! est under 43
! surpluscentre
 
|-align="left"
! Tertiary 4-way Pipe to Joint 4 Needle Valve Hose     
! 1
! Hydraulic Connector
! guess under 20
!
 
|-align="left"
! Tertiary 4-way Pipe to Joint 5 Needle Valve Hose     
! 1
! Hydraulic Connector
! guess under 20
!
 
|-align="left"
! Tertiary 4-way Pipe to Joint 6 Needle Valve Hose     
! 1
! Hydraulic Connector
! guess under 20
!
 
|-align="left"
! Joint 1 Solenoid Valve
! 1
! 2?-position directional control for joint 1 hydraulic motor
! est under 50
! surpluscentre
 
|-align="left"
! Joint 2 Solenoid Valve
! 1
! 2?-position directional control for joint 2 hydraulic motor
! est under 50
! surpluscentre
 
|-align="left"
! Joint 3 Solenoid Valve
! 1
! 2?-position directional control for joint 3 hydraulic motor
! est under 50
! surpluscentre
 
|-align="left"
! Joint 4 Solenoid Valve
! 1
! 2?-position directional control for joint 4 hydraulic motor
! est under 50
! surpluscentre
 
|-align="left"
! Joint 5 Solenoid Valve
! 1
! 2?-position directional control for joint 5 hydraulic motor
! est under 50
! surpluscentre
 
|-align="left"
! Joint 6 Solenoid Valve
! 1
! 2?-position directional control for joint 6 hydraulic motor
! est under 50
! surpluscentre
 
|-align="left"
! Joint 1 Needle Valve to Solenoid Valve  Hose     
! 1
! Hydraulic connector
! guess under 20
!
 
|-align="left"
! Joint 2 Needle Valve to Solenoid Valve Hose     
! 1
! Hydraulic connector
! guess under 20
!
 
|-align="left"
! Joint 3 Needle Valve to Solenoid Valve Hose
! 1
! Hydraulic connector
! guess under 20
!
 
|-align="left"
! Joint 4 Needle Valve to Solenoid Valve Hose
! 1
! Hydraulic connector
! guess under 20
!
 
|-align="left"
! Joint 5 Needle Valve to Solenoid Valve Hose
! 1
! Hydraulic connector
! guess under 20
!
 
|-align="left"
! Joint 6 Needle Valve to Solenoid Valve Hose
! 1
! Hydraulic connector
! guess under 20
!
 
|-align="left"
! Joint 1 Solenoid Valve to Tank Hose
! 1
! Hydraulic Connector
! guess under 20
!
 
|-align="left"
! Joint 2 Solenoid Valve to Tank Hose
! 1
! Hydraulic Connector
! guess under 20
!
 
|-align="left"
! Joint 3 Solenoid Valve to Tank Hose
! 1
! Hydraulic Connector
! guess under 20
!
 
|-align="left"
! Joint 4 Solenoid Valve to Tank Hose
! 1
! Hydraulic Connector
! guess under 20
!
 
|-align="left"
! Joint 5 Solenoid Valve to Tank Hose
! 1
! Hydraulic Connector
! guess under 20
!
 
|-align="left"
! Joint 6 Solenoid Valve to Tank Hose
! 1
! Hydraulic Connector
! guess under 20
!
 
|-align="left"
! Joint 1 Solenoid Valve to Hydraulic Motor Hose
! 2
! Hydraulic Connector
! guess under 20
!
 
|-align="left"
! Joint 2 Solenoid Valve to Hydraulic Motor Hose
! 2
! Hydraulic Connector
! guess under 20
!
 
|-align="left"
! Joint 3 Solenoid Valve to Hydraulic Motor Hose
! 2
! Hydraulic Connector
! guess under 20
!
 
|-align="left"
! Joint 4 Solenoid Valve to Hydraulic Motor Hose
! 2
! Hydraulic Connector
! guess under 20
!
 
|-align="left"
! Joint 5 Solenoid Valve to Hydraulic Motor Hose
! 2
! Hydraulic Connector
! guess under 20
!
 
|-align="left"
! Joint 6 Solenoid Valve to Hydraulic Motor Tubing
! 2
! Hydraulic Connector
! guess under 20
!
 
|-align="left"
! DC Power Supply
! 1
! To power various electronic components
! guess under 100
!
 
|-align="left"
! Power Supply to Stepper Motor Driver Wires
!
! Electric Connector for 6 channels
! guess under 10
!
 
|-align="left"
! Power Supply to Solenoid Driver Wires
!
! Electric Connector for 6 channels
! guess under 10
!
 
|-align="left"
! Microcontroller
! 1
! To receive computer signals and shaft encoder signals; to command stepper motor drivers and solenoid drivers (ex. arduino mega 2560)
! est under 60
!
 
|-align="left"
! Stepper Motor Driver
! (6 channels total)
! To receive microcontroller signals and give electric current to stepper motors for joint 1-6 needle valves
! est under 60
!
 
|-align="left"
! Microcontroller to Stepper Motor Driver Wires
!
! Electric Connector for 6 channels
! guess under 10
!
 
|-align="left"
! Stepper Motor
! 6
! To allow electric operation of joint 1-6 needle valves
! est under 160
! ex. Pololu
 
|-align="left"
! Stepper Motor Driver to Stepper Motor Wires
!
! Electric Connector for 6 Motors
! guess under 10
!
 
|-align="left"
! Stepper Motor Angle
! 6
! Main Bracket Component for Stepper Motor and Needle Valve (
! est under 40
!
 
|-align="left"
! Stepper Motor Hub
! 6
! To connect onto stepper motors as component for bracket
! guess under 20
!
 
|-align="left"
! Needle Valve Hub
! 6
! To connect onto needle valve handle as component for bracket
! guess under 20
!
 
|-align="left"
! Needle Valve Plate
! 12
! Bracket Component to hold needle valve
! guess under 20
!
 
|-align="left"
! Needle Valve Bolt
! 18
! Fastener Piece
! guess under 20
!
 
|-align="left"
! Solenoid Driver
! (6 channels)
! To receive microcontroller signals and give electric current to joint 1-6 solenoid valves (PWM Driver 1.1 from reprapwiki)
! est under 26
!
 
|-align="left"
! Shaft Encoder
! 6
! To measure speed of joint 1-6 shaft rotation
! guess under 300
!
 
|-align="left"
! Microcontroller to Shaft Encoder Wires
!
! Electric Connector for 6 Shaft Encoders
! guess under 20
!
 
|-align="left"
! Grand Total
!
! Sum of guesses, informed estimates
! 5013 + P
!
 
|}
 
 
 
[[Category: Industrial Robot]]

Latest revision as of 07:22, 24 July 2011

Redirect to:

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Industrial_Robot_Bill_of_Materials&oldid=34494"